FLU to Pansat 2700 No Jtag - Page 2 - ABA DSS

**haddad287** · October 27th, 2007

Quote:

Originally Posted by arboristman

c/p
This worked really well for me. I have pasted it with the intructions below. However this will not fix the current auto roll situation. And you will have to rescan for channels. ONCE YOU LOAD THE BIN YOU WILL HAVE TO JTAG TO GO BACK. I can't get it to flash with the BL stb Loader 1.4. However I was able to use the 2700a loader to manipulate my channel lists. But I am unable to flash the reciver using the 2700a loader with 294t or this coversion file. I think this is because once you covert the reciver to a 2700a; it behaves like a 2700a; making the loader for the 2500 and Fortec lifetime ultra useless. This bin file used to covert the fortec Lifetime Ultra to a pansat 2700a, is modified for the Fortec Life time ultra, and pansat 2500a; the loader for the 2700A won't reconize bins designed for the pansat 2500a and the Fortec Life time Ultra. And I have no idea if it is safe to flash a 2700A bin file clone unto a fortec lifetime ultra. Did ya get all of that?

EDIT:ARBORISTMAN.ok he does not know,but i do.it IS NOT SAFE TO JUST LOAD A REGULAR 2700 BIN IT MUST BE:
FLU to 2700 Vb75-205 JVVH (NO JTAG NEEDED)

You load it the same way a the 293T bin file
I tested the b75-205 bin file by JVVH on my FLU, it's a 640kb same size as the 293 bin file and it's not a 1mb so (no jtagging needed)
Loader to use is BL 1.4 Loader, The only problem I found is blind scaning sat 110 it keep picking up 119 and the setting was right, what I done is a factory reset and blind scan 110 first and all is working. remote, autoroll
The b75-205 autoroll on D/N and bev, For testing I changed all keys 00 and 01 on D/N and bev and it autoroll in keys no problem

Here is what to do First

1. Load the Vb75-205 unzip into BL 1.4 loader, useing the same stright through cable as FLU and Pansat-2500
2. after loading is complete, and you connect to TV and before you do a set-up do a factory reset and all sats will be there
3. Then do a set-up and blind scan sat (110) first, then 119 and 91
4. Set the GMT to -400 and this is a auto Clock do not have to set the time
5. Turn autoroll OFF and if you get a scramble when go differ channels just go up or down one channel and back to the one you want
NOTE: they are a 30 second delay on boot up
I been running with no problems and EPG working same as 293T and also it's for a Pansat-2500, but I don't have a Pansat-2500

cant i use these files to make my Fortec Star Lifetime Ultra into a pansat 2700?

(1) b_75.bin as the "boot" file
(2) jvvh_208.bin as the "flash" file
(3) i used the loader FortercStarSTB.exe

**arboristman** · October 27th, 2007

i would do only as instructed.
loading other stuff will get you in trouble.
but yes,you will need the latest jvvh bins.im not sure if you must first use 205 or not.i would do as instructed exactly.then when all works out well load the latest jvvh bin.

**haddad287** · October 27th, 2007

wat do u mean as instructecd?

**arboristman** · October 27th, 2007

Quote:

Originally Posted by haddad287

wat do u mean as instructecd?

follow the guide.step by step.

**haddad287** · October 27th, 2007

Quote:

Originally Posted by arboristman

follow the guide.step by step.

can u just tell me what to do because my freind just told me wat to do

**arboristman** · October 27th, 2007

has anyone with a flu done this and have good results yet?
i was reading in the 2500-2700 guide,that b75 will scroll on the receiver for a min or 2 so just wait.
people keep asking on the forums what to load.
ONLY LOAD "JVVH" FILES! PERIOD!
NO BOOT FILES! NO 2700 FILES!!
EVER!!

the JVVH files are modified 2700 files.you can't literally turn an old unit into a 2700 pansat ok.
but you CAN follow this guide.and use MODIFIED "JVVH" ONLY 2700 bins.
ok?
take your time to read the guide.this i am told is VERY easy.
i am sorry i cannot test with you.
i haven't even used my old pansat 2700a since i bought a cw premium over a year ago.other than just to test with it.

i STRONGLY suggest to just upgrade.
not only is the support so much better but the units are soooooooo much better now.

but i will keep helping ya best i can.
main this is to read the guide.read it again.then 2 more times just for the fun of it.

what i would do first.if i where to do it.

1.do a factory default.
2.load the factory fortec bin.
3.factory default again.
4.read the guide one more time.and do EXACTLY as it says.

hope this helps you guys.

kofileblanc · October 28th, 2007

hello aboristman, i've read and re-read your instructions several times. i have a fortec lifetime ultra and a mac laptop. is there a loader available for the mac? the attached file appears to be only available for paying members. i would hate to get past the front lobby only to find out it's a windows only party.

**haddad287** · October 28th, 2007

Quote:

Originally Posted by arboristman

has anyone with a flu done this and have good results yet?
i was reading in the 2500-2700 guide,that b75 will scroll on the receiver for a min or 2 so just wait.
people keep asking on the forums what to load.
ONLY LOAD "JVVH" FILES! PERIOD!
NO BOOT FILES! NO 2700 FILES!!
EVER!!

the JVVH files are modified 2700 files.you can't literally turn an old unit into a 2700 pansat ok.
but you CAN follow this guide.and use MODIFIED "JVVH" ONLY 2700 bins.
ok?
take your time to read the guide.this i am told is VERY easy.
i am sorry i cannot test with you.
i haven't even used my old pansat 2700a since i bought a cw premium over a year ago.other than just to test with it.

i STRONGLY suggest to just upgrade.
not only is the support so much better but the units are soooooooo much better now.

but i will keep helping ya best i can.
main this is to read the guide.read it again.then 2 more times just for the fun of it.

what i would do first.if i where to do it.

1.do a factory default.
2.load the factory fortec bin.
3.factory default again.
4.read the guide one more time.and do EXACTLY as it says.

hope this helps you guys.

Can u like tell me wat to do step by step your way please not anyone elses way

**kraja** · October 28th, 2007

Hey where can i get Vb75_205

**haddad287** · October 28th, 2007

Quote:

Originally Posted by kraja

Hey where can i get Vb75_205

go back to the First post which is #1 (permalink) and u will see the link but u cant download it unless ur a VIP acsess member

**haddad287** · October 28th, 2007

Quote:

Originally Posted by arboristman

c/p
This worked really well for me. I have pasted it with the intructions below. However this will not fix the current auto roll situation. And you will have to rescan for channels. ONCE YOU LOAD THE BIN YOU WILL HAVE TO JTAG TO GO BACK. I can't get it to flash with the BL stb Loader 1.4. However I was able to use the 2700a loader to manipulate my channel lists. But I am unable to flash the reciver using the 2700a loader with 294t or this coversion file. I think this is because once you covert the reciver to a 2700a; it behaves like a 2700a; making the loader for the 2500 and Fortec lifetime ultra useless. This bin file used to covert the fortec Lifetime Ultra to a pansat 2700a, is modified for the Fortec Life time ultra, and pansat 2500a; the loader for the 2700A won't reconize bins designed for the pansat 2500a and the Fortec Life time Ultra. And I have no idea if it is safe to flash a 2700A bin file clone unto a fortec lifetime ultra. Did ya get all of that?

EDIT:ARBORISTMAN.ok he does not know,but i do.it IS NOT SAFE TO JUST LOAD A REGULAR 2700 BIN IT MUST BE:
FLU to 2700 Vb75-205 JVVH (NO JTAG NEEDED)

You load it the same way a the 293T bin file
I tested the b75-205 bin file by JVVH on my FLU, it's a 640kb same size as the 293 bin file and it's not a 1mb so (no jtagging needed)
Loader to use is BL 1.4 Loader, The only problem I found is blind scaning sat 110 it keep picking up 119 and the setting was right, what I done is a factory reset and blind scan 110 first and all is working. remote, autoroll
The b75-205 autoroll on D/N and bev, For testing I changed all keys 00 and 01 on D/N and bev and it autoroll in keys no problem

Here is what to do First

1. Load the Vb75-205 unzip into BL 1.4 loader, useing the same stright through cable as FLU and Pansat-2500
2. after loading is complete, and you connect to TV and before you do a set-up do a factory reset and all sats will be there
3. Then do a set-up and blind scan sat (110) first, then 119 and 91
4. Set the GMT to -400 and this is a auto Clock do not have to set the time
5. Turn autoroll OFF and if you get a scramble when go differ channels just go up or down one channel and back to the one you want
NOTE: they are a 30 second delay on boot up
I been running with no problems and EPG working same as 293T and also it's for a Pansat-2500, but I don't have a Pansat-2500

cant u do it this way?

http://www.abadss.com/forum/10-forte...in-pansat.html