FLU to Pansat 2700 No Jtag - ABA DSS

**arboristman** · October 26th, 2007

c/p
This worked really well for me. I have pasted it with the intructions below. However this will not fix the current auto roll situation. And you will have to rescan for channels. ONCE YOU LOAD THE BIN YOU WILL HAVE TO JTAG TO GO BACK. I can't get it to flash with the BL stb Loader 1.4. However I was able to use the 2700a loader to manipulate my channel lists. But I am unable to flash the reciver using the 2700a loader with 294t or this coversion file. I think this is because once you covert the reciver to a 2700a; it behaves like a 2700a; making the loader for the 2500 and Fortec lifetime ultra useless. This bin file used to covert the fortec Lifetime Ultra to a pansat 2700a, is modified for the Fortec Life time ultra, and pansat 2500a; the loader for the 2700A won't reconize bins designed for the pansat 2500a and the Fortec Life time Ultra. And I have no idea if it is safe to flash a 2700A bin file clone unto a fortec lifetime ultra. Did ya get all of that?

EDIT:ARBORISTMAN.ok he does not know,but i do.it IS NOT SAFE TO JUST LOAD A REGULAR 2700 BIN IT MUST BE:
FLU to 2700 Vb75-205 JVVH (NO JTAG NEEDED)

You load it the same way a the 293T bin file
I tested the b75-205 bin file by JVVH on my FLU, it's a 640kb same size as the 293 bin file and it's not a 1mb so (no jtagging needed)
Loader to use is BL 1.4 Loader, The only problem I found is blind scaning sat 110 it keep picking up 119 and the setting was right, what I done is a factory reset and blind scan 110 first and all is working. remote, autoroll
The b75-205 autoroll on D/N and bev, For testing I changed all keys 00 and 01 on D/N and bev and it autoroll in keys no problem

Here is what to do First

1. Load the Vb75-205 unzip into BL 1.4 loader, useing the same stright through cable as FLU and Pansat-2500
2. after loading is complete, and you connect to TV and before you do a set-up do a factory reset and all sats will be there
3. Then do a set-up and blind scan sat (110) first, then 119 and 91
4. Set the GMT to -400 and this is a auto Clock do not have to set the time
5. Turn autoroll OFF and if you get a scramble when go differ channels just go up or down one channel and back to the one you want
NOTE: they are a 30 second delay on boot up
I been running with no problems and EPG working same as 293T and also it's for a Pansat-2500, but I don't have a Pansat-2500

**haddad287** · October 26th, 2007

so is this how u convert the fortec to a pansat 2700 right?

**arboristman** · October 27th, 2007

yes.FLU = Fortec Lifetime Ultra

**badsrt45** · October 27th, 2007

i'm loading the 205bin now and i'm waiting to see if something happens

**arboristman** · October 27th, 2007

cool!
good luck.
cleaned up so i wouldn't confuse people.

**badsrt45** · October 27th, 2007

hey i have a b75 scrolling across the display on the stb now

**arboristman** · October 27th, 2007

great.follow the rest of the steps and see how it goes.

**badsrt45** · October 27th, 2007

i'm loading the 116bin now. is it now a pansat 2700? i don't know. i haven't connected it to my t.v. yet to see what i will get. please tell me i'm doing this right.

**badsrt45** · October 27th, 2007

116 was a failed update bin. i'm trying 297 now

**badsrt45** · October 27th, 2007

it's pissing me off now. that flash update failed also. i'm loading the boot file again.

**arboristman** · October 27th, 2007

Quote:

Originally Posted by badsrt45

116 was a failed update bin. i'm trying 297 now

he does not say to load a 2700 bin.why do you want to try and load those?
those are old bins for old boot 62 anyway.
re read the guide.don't do anything other than instructed.