Converting fortec ---> pansat and how to load bin on pansat

[haddad287]

*****B75 Convertion*****

Get the full guide here including all the files here!
This will work with both the fortec and pansat remote

First, here's a list of things that you need:

- RS 232 female-female Straight Cable

Instructions/Procedure:

- Please turn OFF your receiver and disconnect it from the satellite & the TV cable
- Connect your receiver to your computer using RS 232 female-female Straight Cable
- Now open the Blacklist STB Updater 1.4.0.0
- Now, please select the "BIN" option on the Blacklist STB Updater 1.4.0.0
- Now please select the correct "COM" port on the Blacklist STB Updater 1.4.0.
- Now, please click the "Select Bin" button on the Blacklist STB Updater 1.4.0.0
- Now, please look for the "jvvh_208_2500to2700.bin"file and click on it
- Now, please turn ON your receiver and as soon as you see the first "dash light"on your receiver's front panel, click the "Write Bin" button on the Blacklist STB Updater 1.4.0.0
- Now, please wait and let the bin download process complete
- When it's done, your receiver will REBOOT automatically and soon you'll see B 7 5 flashes back and forth on your receiver's front panel
- Now, please close the Blacklist STB Updater 1.4.0.0 window
- Please turn OFF your receiver
- Now re-open the Blacklist STB Updater 1.4.0.0
- Now, please select the "BIN" option on the Blacklist STB Updater 1.4.0.0
- Now please select the correct "COM" port on the Blacklist STB Updater 1.4.0.
- Now, please click the "Select Bin" button on the Blacklist STB Updater 1.4.0.0
- Now, please look for the "Jvvh_218_pT.bin"file and click on it
- Now, please turn ON your receiver and as soon as you see the first "dash light"on your receiver's front panel, click the "Write Bin" button on the Blacklist STB Updater 1.4.0.0
- Now, please wait and let the bin download process complete
- When it's done, your receiver will REBOOT automatically and soon you'll see B 7 5 flashes back and forth on your receiver's front panel
- That flashing B 7 5 will stop and freeze on number 5 for 30 seconds
- After 30 seconds or so, your receiver will automatically boot (It'll turn ON automatically, after 30 seconds)
- Now, please turn your receiver OFF and disconnect it from your computer

Now folo these next steps on how to load the latest bin

How to load bins to your converted Fortec Star L.T.U (which is now a Pansat 2700)

Note: The current and the latest working bin for these receivers is: 296 Bin

- Please turn OFF your receiver
- Connect your receiver to your computer using RS 232 female-female Straight Cable
- Now open the Blacklist STB Updater 1.4.0.0
- Now, please select the "BIN" option on the Blacklist STB Updater 1.4.0.0
- Now please select the correct "COM" port on the Blacklist STB Updater 1.4.0.
- Now, please click the "Select Bin" button on the Blacklist STB Updater 1.4.0.0
- Now, please look for the latest bin and click on it
- Now, please turn ON your receiver and as soon as you see the first "dash light"on your receiver's front panel, click the "Write Bin" button on the Blacklist STB Updater 1.4.0.0
- Now, please wait and let the bin download process complete
- When it's done, your receiver will REBOOT automatically and soon you'll see B 7 5 flashes back and forth on your receiver's front panel
- That flashing B 7 5 will stop and freeze on number 5 for 30 seconds
- After 30 seconds or so, your receiver will automatically boot (It'll turn ON automatically, after 30 seconds)
- Now, please turn your receiver OFF and disconnect it from your computer

Note: After you finish with the above steps, you have to re-scan your satellite(s). After you're done with that, you have to enter the latest keys (Dishnetwork or BellExpressVu). Here's what you need to do after you re-scan your satellite(s):

- Go to MENU
- Then, go to Parental Control
- Then, go to Second Pin and enter 0000
- Then, go to Set Default Key

After you set default keys, exit out of the menu and start watching TV!!

[arboristman]

k.thanks guys.now cleaned up.and stuck.thank you both for working it all out.
enjoy testers!

[veegroove]

Originally Posted by arboristman

k.thanks guys.now cleaned up.and stuck.thank you both for working it all out.
enjoy testers!

arboristman I followed your instructions to the letter to convert my flu but I am unable to access the menu to continue the process the screen is stuck at the ftrae. any idea what the problem could be. Thanks

[veegroove]

I went over the entire process and guess what I am getting an error message write failed ER2 message on both JVVH 205 and 219 bins. Thanks

[haddad287]

Originally Posted by veegroove

I went over the entire process and guess what I am getting an error message write failed ER2 message on both JVVH 205 and 219 bins. Thanks

You need to make sure you got the right files and follow the guide STEP BY STEP
and i would like to ask you one question did you find the files on the net seperalty or did you find it all in 1 because the files can be found all in 1 folder on the net

Find the latest keys here
--http://www.abadss.com/forum/281-new-keys/--

[veegroove]

Originally Posted by haddad287

You need to make sure you got the right files and follow the guide STEP BY STEP
and i would like to ask you one question did you find the files on the net seperalty or did you find it all in 1 because the files can be found all in 1 folder on the net

Find the latest keys here
--http://www.abadss.com/forum/281-new-keys/--

I found all the files in 1 folder apparently 04/04 flus are not taking these bins from what I have been reading

[haddad287]

Originally Posted by veegroove

I found all the files in 1 folder apparently 04/04 flus are not taking these bins from what I have been reading

Remember this convertion guide only works for Lifetime Ultra ---> Pansat and if you do got a Lifetime Ultra and it doesent work you made a mistake

And i probelby know what it is
When you select the first bin which is j27_205_1.binand click on it then it says to turn ON you reciver and just when you see the FIRST dash of lightclick on the write bin and then wait till 100% is completed

Also when you load the second bin which is jvvh_208_1.bin you also need to make sure you click the write bin only when you see the FIRST dash of light you need to click the write bin

Because lots of people who says it doesent work its properly becasue they dident click write bin as soon as the first dash of light appears

Find the latest keys here
---http://www.abadss.com/forum/281-new-keys/---

[lalosccr]

help i loaded the con. kit and now only get knight rider. any sugg. greatly appriciated thanx!

[prosil1]

i could load the first bin but when i load the jvvh_208_1.bin i get write fail

[haddad287]

Originally Posted by prosil1

i could load the first bin but when i load the jvvh_208_1.bin i get write fail

go back and read #7 (permalink)

[Red_Dono]

when converting do you have to write the 205 bin or can you write the new 223 bin with GC fix on it?

Also, is the 223 bin clone safe or is the kill-bill code in there?

Does the conversion make your box kill code safe?

[Red_Dono]

I think I answered my own question...Chancy has a 223T bin out...I do not know if the IR codes were changed to allow the use of the FLU remote ... I'm still looking into this