|
A Must Read from Fwank7 (FLU converted to Pansat 2700)
C/P
We have decided to go this route as Ukronic stated there are "way to many" different types of bins and it's difficult not to mention confusing to everyone else as well.
It would seem as of late that it's become more of a RACE to see who can put their files out first...bad idea, for reasons such as this, complete testing of the bins faulters at this point. Our files will be fully tested and getting the proper mods before being released. Ukronic, Nikk, and myself as a team have combined all our info, and our bins will only have minor text differences from each others.
This will also help us in helping others that use one of our 3 PUFF bins when having issues--as all mods will be done the same.
As for the BG (background) it will still be one of your choice and will still remain the same until you change it your self by loading -PUFF-_boot_ Ver.1.0.1 bin.
We are going to release new Boot files called -PUFF-_boot_ Ver.1.0.1.
Same as the one Ukronic has already released just with different BG choices.
This is an updated flash fix and you will have many to choose from for the BackGround of your choice.
If you are on old PUFF you can still use our bins and it will work but with the new flash fix boot BG being in different location then old PUFF you will lose your current BG in menu and end up with blue/green BG but everything else will function properly.
To fix that just load one of the new -PUFF-_boot_ Ver.1.0.1 with BG of your choice afterwards.
Loading is still easy.
old PUFF to PUFF 1.0.1.
Quote:
(1)Open loader you normally use to load bins.
File, Choose UKR_260-PUFF- or Jvvh_260_Nkk_PUFF or Jvvh_Fortec_Pansat_260_(PUFF)(Recovery).
Turn reciever on and first "P" Hit Download.
Wait for write to complete and reciever fully boots up to ON.
Turn reciever OFF from back switch.
(2)Open UkRoNiC's BOX Updater .421. or whatever boot loader you use.
Click File, choose -PUFF-_boot_ Ver.1.0.1 of choice.
Turn reciever on, let it fully boot to ON.
Hit Download.
Wait for write to complete and reciever to self boot to ON.
Lzma to PUFF 1.0.1.
Quote:
(1)Open UkRoNiC's BOX Updater .421. or whatever boot loader you use.
Click File, choose -PUFF-_boot_ Ver.1.0.1 of choice.
Turn reciever on, let it fully boot to ON.
Hit Download.
Wait for write to complete and reciever to self boot to ON.
Turn reciever OFF from back switch.
(2)Open loader you normally use to load bins.
File, Choose UKR_260-PUFF- or Jvvh_260_Nkk_PUFF or Jvvh_Fortec_Pansat_260_(PUFF)(Recovery).
Turn reciever on and first "P" Hit Download.
Wait for write to complete and reciever fully boots up to ON.
b75 to PUFF 1.0.1
Quote:
(1)Open UkRoNiC's BOX Updater .421. or whatever boot loader you use.
Click File, choose -PUFF-_boot_ Ver.1.0.1 of choice.
Turn reciever on, let it fully boot to ON.
Hit Download.
Wait for write to complete and reciever to self boot, cycle threw PUFF twice, Pausing on F.
Turn reciever OFF from back switch.
(2)Open loader you normally use to load bins.
File, Choose UKR_260-PUFF- or Jvvh_260_Nkk_PUFF or Jvvh_Fortec_Pansat_260_(PUFF)(Recovery).
Turn reciever on and first "P" Hit Download.
Wait for write to complete and reciever fully boots up to ON.
293T or 294T to PUFF 1.0.1.
Quote:
(1)Open Loader you normally use to load bins.
Click File, choose -PUFF-_boot_ Ver.1.0.1 of choice.
Click boot file on loader.
Turn reciever on, let it fully boot to ON.
Hit Download.
Wait for write to complete and reciever to self boot, cycle threw PUFF twice, Pausing on F.
Turn reciever OFF from back switch.
(2) Using same loader. (the one you normally use to load bins).
File, Choose UKR_260-PUFF- or Jvvh_260_Nkk_PUFF or Jvvh_Fortec_Pansat_260_(PUFF)(Recovery).
Click FLASH on Loader.
Turn reciever on and first "P" Hit Download.
Wait for write to complete and reciever fully boots up to ON.
Fwank7. Jvvh-Team-PUFF.
|
Linear Mode
