Sonicview down??

[Jim Warren]

Hi

I have the SV8000 at my vacation home, and it was working last sunday.

At my home I have the SV360 Elite it is not working.
I/ve factoy reset, scanned, rebooted, powered off/on, checked server,
signal on 110 & 119 about s=70, Q=95, ihub is blinking.
I can get 100,213 ect.

West coast 7am.


Is the server down?

Thanks

[baron1]

mine is up

putting on ch 105-turn off from remote-then turn off from rear switch-wait 30 seconds-turn on from rear switch then from remote see if that finds the channels

[ftanewb1]

Originally Posted by Jim Warren

Hi

I have the SV8000 at my vacation home, and it was working last sunday.

At my home I have the SV360 Elite it is not working.
I/ve factoy reset, scanned, rebooted, powered off/on, checked server,
signal on 110 & 119 about s=70, Q=95, ihub is blinking.
I can get 100,213 ect.

West coast
Is the server down?

Thanks

Mine is still up ,West coast 9.00 am, SV 8000

[Jim Warren]

Originally Posted by baron1

mine is up

putting on ch 105-turn off from remote-then turn off from rear switch-wait 30 seconds-turn on from rear switch then from remote see if that finds the channels

Thanks for the quick reply.

OK did that, no change

IP config
type= DHCP
loc ip= 192.168.1.100
loc port= 1920
subnet= 255.255.255.0
gateway= 192.168.1.1
use DNS= yes
domain = www.svftaiks.com
dns ip= 192.168.0.1
server port=1920
serial ????

ONLY GETTING 100 213 ECT

Is this problem unique to 360/elite??

Thanks

[cdo_care]

The best thing is wait for a new files to release very soon....The new server is working very well and freeze free...

[capncrunk]

It seems establishing the first connection with the server always takes a minute. i can see my router and modem and have become familiar with how the lights dance when the SV is sending/receiving a request. sometimes it has to send 3 or 4 and i have to turn the box on/off to get it up.
i have the same method for every night when i get home. turn the box on, let it sit for a minute, change channel up/down one... if i don't get pic i wait another minute and try again. if i don't get pic i shut it off with the remote, turn it back on and i get what i'm looking for.

[Jim Warren]

Hi

I've been down since Monday,
IS THE SERVER DOWN???
I have tried the suggestions, no results, getting 100 and 213,
every channel shows No Service or Scrambled.

I have nfusion HD in the box, but was waiting to get a signal to aid me in the setup.

I also have the Dish 1000.2 ready to install.

What do you suggest????


Thanks

[gibahca]

oh man..plug the nfusion in.
Dont waste your time waiting something from SV.