[disguy]

So, I haven't used my SV for a while. It's been sitting in another room and for some reason some of the channels have no signal. Reboot, factory default, reinstall everything n channels, rescan, nothing. The channels we didn't watch on that sat works fine. Those we had saved(Thai channels) lost all the signal. Bring it into the living room, same thing. NF works fine with that sat though. Still running 360e with 414bin 2.1ihub. Tried a couple older bins and the signal doesn't move up any on those channels. So is anyone having this problem with the Thai channels? Kinda odd that the sat has signal scans everything except the channels I had previously saved

Oh and has newlink already pushed out the ihubs? Cause I tried 200, 140, and 303 but nothing came up. Signals fine and all

[steven charles]

why are you asking about 97.w if that sat doesn,t require you to intall a bin in order to watch that sat only the factory i believe good luck and probably got a problem with the switch or the connections.....

[disguy]

Seeing if anyone else has/had the problem and has a solution duh.. Why would there be a problem with the switch when it works just fine with NF? either way, problem fixed itself.

[steven charles]

thats good that your good now but you know sonicview had this problem for a long time with the bins and i meant to check the line connections to the switch and receiver and the channels on 97.w are unencrypted so that wouldn,t have no problem with 97.w the signal going in and out i think you should do some reading friend because it was posted for awhile that the bin 414 had this problem on the signal going in and out good luck and hope they fix this issue soon....

[ignored ant]

With even just the Factory Bin you can See 97w channels,If i'm correct it's a true FTA sat [Not Encrypted]