Nfusion HD Set up via USB stick (A Guide)

[creativegenius]

If you have just got a new nfusion HD unit and aren't really sure what to do next, well this little tutorial will help you get your unit up and running via loading files by USB stick or Thumbdrive.

Try this:

Here is the guide for setting up the nfusion hd

c/p from release notes

-Install UHF Module before you start, guide for that is guide section.
The 8spk Module is needed for DN only at this time.

-ALSO NOTE THE FAN IN Unit DOES NOT RUN TILL 3RD
PARTY SOFTWARE IS INSTALLED. THE PLASTIC FILLER ON
BACK IS FOR JUST THAT, NOT ANYTHING MORE. .
IF YOU INSTALL BOARD ITS NO LONGER NEEDED.

Things to know before you load the softare.

-From factory BIN , you will see a screen asking for
language (pick yours). Then scroll to 'storage',
set to 'front' and 'usb'. Then you will see 'upgrade'
software, hit ok. You then should see your files
from your memory stick (find the one that starts
with nf_hd_v1.3sR_01.BIN this is the main software
BIN after you confirm it is the file you want to
load), 'hit green' button on remote 'wait' till it
completes, 'when it does' it will prompt you hit
ok to reboot (software is now loaded). After new
BIN is loaded you will see softare load on front panel.

-Box setup (do factory reset to start guided setup).

-Now you move to guided setup at this point in
time you should see Language screen again.

-Follow the screens to setup your LNB's 'note:
be sure to pick correct LNB . The 'info' icon on
the remote changes LNB type, then you pick the
satellite to scan with 'ok' button.
Every screen has 'what' buttons do on them.

-Once all satellites are scanned then goto 'memu'
'installation' 'network' then back out this connects
DHCP.

-Also pvr (is set to front or back usb) reords
via 'red' button on remote stores file on your
attached drive (we will continue to get rest of
the functions completed in upcoming bins) we have
a set plan for this (did not want to hold up bin)
i am more than sure most will like this function
this records in .ts format very common but do note
your pc you use must support HD for his to play
1080x1920 (no format of drive is needed) and you
can playback content on pc box supports full pvr
functions.

In this release is (version nf_hd_v1.3sR_01)
also factory BIN (nf_HD_factory)
BIN loader for pc (not needed) usb is fine
UHF board install instructions
ippvr HD (beta) v1.5HD

-THIS IS ONLY FOR HD BOX
end of c/p

Also turn the emul off when your all done with your set up and scanning the birds and it should come in right away.

Creative Genius