Well............. - ABA DSS

pulpworker · 4 Weeks Ago

Well my cnx is here today, just got the parcel card, so you guys think I will be happy with this selection, any input would be very much appreciated. Thanks to all of you who can give me some good news about this receiver, god bless.

pulpworker · 4 Weeks Ago

LOL someone gonna give me an answer, its still up there in the mail, come on now people , reply to my post.

**VGiddy** · 4 Weeks Ago

You should have picked the NFusion instead. Good Luck.

That is not true...he will be just fine with his CNX...SJ

**bigevil69** · 4 Weeks Ago

cnx is a good solid receiver i believe you will be very happy with it

eserwin · 4 Weeks Ago

I have a Nfusion and a Nano2, and to be honest I like my CNX has PPVs movies and sports but if we talk in downtime and number of channels up, Nf is the king. You have one of the beasts boxes though, CNX team will always support you. Enjoy it bro!

pulpworker · 4 Weeks Ago

Thank you, so some are saying there is quite a bit of downtime with this receiver is that true.

No not true...some glitching is common, but very little down time for the last month or two now.

Things are changing all the time with channels, and a rescan is required to update. (we had PPVs last week & they ae down now)
Cnx crew is working on more stuff for us...stay tuned.

pulpworker · 4 Weeks Ago

So now I just ordered an nf solaris is that a good receiver as well, thank you.

Yes, it is always a good idea to not keep all your apples in the same basket.
NF is good support, but you will end up liking your CNX more in the end...SJ

eserwin · 4 Weeks Ago

Quote:

Originally Posted by pulpworker

Thank you, so some are saying there is quite a bit of downtime with this receiver is that true.

Yes, it's true but that happens when they are releasing a new bin, they are doing a pretty good job becoming from a team who never work with IKS.

pulpworker · 4 Weeks Ago

So to set the cnx up do I only have to load the file, can someone explain and point me in the right direction, maybe a link to the file needed to run this receiver, the nano 2, now that would be very helpful, thank you, god bless all.

**buddyjh** · 4 Weeks Ago

You got the nano right? Its a very good receiver and cnx has worked most of the bugs out...I have one and am very pleased with it...here's some links for you to get started with your setup>>>>

http://www.abadss.com/forum/1006-con...eo-dongle.html

This is the latest upgrade file...load this first>>>

http://www.abadss.com/forum/1007-con...le-4-18-a.html

...and here's the latest dongle file...load this next>>>

http://www.abadss.com/forum/1007-con...-10-t2324.html

pulpworker · 4 Weeks Ago

so all I do is download the file, open it, put it on my stick, then do the same with the dongle file and load that on the receiver to, set my ports up and scan that should do it your saying?? I won't do anything until I hear back and for those of you who helped me thank you and god bless.

pulpworker · 4 Weeks Ago

I don't have to watch that video do I?? I mean I did and thank you for giving me that link, really great to have but now was wondering I just load the two files and I should be ready to go or no??

**buddyjh** · 4 Weeks Ago

You do have the nano and not the nano2 right? If you have the nano follow these instructions>>>>

C & P

The IX-NET (IX-200) CNX Dongle works on all supported CNX Receivers.

CNX Dongle Setup Instructions

1. Upgrade your CNX Nano, Mini, Duo or Trio with the latest "Upgrade" file.

2. After the upgrade goto Menu -> Accessory ->RS-232 Mode and select Type to Dongle.

3. Connect the CNX Dongle to the RS-232 Serial Port.

4. Connect the Category 5 Patch cable to the CNX Dongle.

5. After about 10 seconds the CNX Dongle will boot up complete and will activate the network settings. You should notice the ethernet turn on and light up your router or switch port.
Go to Menu -> System Information
On the very bottom line it should show the CNX Dongle software version

6. If it shows the version it means connected but if it shows Unknown it means not connected.

7. When Connected go to USB Menu and select the DGL(cnx dongle upgrade file.).

A. It should start to upgrade the CNX Dongle.
B. After the upgrade please check the System Information in the Menu and make sure the upgraded version is the latest.

8. Go to Menu Accessory -> RS-232 Mode and select Network IP Setup.

9. Your CNX receiver will then read the dongle IP information and display it. If the IP information shows Auto or Maual it means the IP setup has been previously configured.

A. If it shows Not Used it means the setup has not yet been done. If your Category V patch cable is good and it appears there is no problem with the physical connection, please select Auto and Apply.
B. IF you dont see IP information after 20 to 30 seconds there is likely a problem with DHCP on your network or you may need to do a manual network setup.

10. When the network setup has been performed successfully, go to a Bev or DN N3 encrypted channel and the CNX Dongle will try to connect to the IKS server.
Press OK

pulpworker · 4 Weeks Ago

I have the CNX Nano 2 so buddy the two files that you gave me is that all I have to do or is that the same as what you just posted.

**buddyjh** · 4 Weeks Ago

Hey pulpworker I was just informed you had the nano2...thought it was the nano you had since you had posted in the nano section....if you do have the nano2 heres the link you need to get it up and going>>>>>http://www.abadss.com/forum/1077-cnx...p-nano-ii.html

and heres the latest nano2 file>>>>http://www.abadss.com/forum/1078-cnx...tml#post759701

pulpworker · 4 Weeks Ago

If you could give me the directions for Nano 2 that would be great, thank you. God Bless.

**buddyjh** · 4 Weeks Ago

Quote:

Originally Posted by pulpworker

If you could give me the directions for Nano 2 that would be great, thank you. God Bless.

Everything you need is in the post above for the nano2...be careful where you post next time...make sure its in the right receiver section

pulpworker · 4 Weeks Ago

oops sorry, I really didn't know, I didn't even know what I had, thought I had the nano until I opened the box, so sorry about that one, don't usually do that.

**buddyjh** · 4 Weeks Ago

Quote:

Originally Posted by pulpworker

oops sorry, I really didn't know, I didn't even know what I had, thought I had the nano until I opened the box, so sorry about that one, don't usually do that.

NP we got it straightened out now...just try what I posted for the nano2 above and let us know how it goes

pulpworker · 4 Weeks Ago

Quote:

Originally Posted by pulpworker

I have the CNX Nano 2 so buddy the two files that you gave me is that all I have to do or is that the same as what you just posted.

I have a guy here and he put the 118 into the computer and had a picture but it keeps saying update not completed please update again, we still have a picture but when we change to any channel that comes up.