Help with missing channels

[Hloader26]

Hey guys I need help w/ my cnxt nano I load the factory bin 7.07 and then the upgrade file 4.05 and last the patch 1207 0237 every thing is working well except that I dont have some ppvs and movie chanls. Idont know what Im doing wrong !!!!! I tried factory reset and set up the setting and scan but for any reason I only got 138 chnls on sat 119 and 186 on 110 it was working fine my setting are : DISH 500 W/DP LNB
QUALITY 90 ON 119 AND 88 ON 110 ANY HELP PLEASE!!!
satellite--- Echo7 119 satellite---Echo8/110w
DISEqc --- 1 DISEqc---2
TP freq --- 12224
LNB ---11250
22KHz Tone ---OFF
Multi-Dish Switch --- OFF
Search Options --- All channels
LNB Power--- ON

[bigevil69]

(Echostar 7 & Echostar 8/10 Only - 2 sats)

* Press the "Menu" button from remote while watching LIVE TV and/or in normal viewing mode
* Press right button (dial around "OK" button) and go to "Installation"
* Press down button (dial around "OK" button) and go down to "Diseqc Switch"
* Press "OK" on "Diseqc Switch"
* You should now be inside The "Diseqc Switch" Menu
* You should be highlighted on the first Diseqc Port (Diseqc 1) that states "None"
* Click "OK" button from remote on the highlighted "None" selection
* You should now see a popup window displayng all of the satellites within your CNX machine
* Press down button (dial around "OK" button),look for and go down to "Echo7"
* Press "OK" button from remote on "Echo7"
* You should now be out of the popup window and back to and highlighted on "Echo7"
* Press down button (dial around "OK" button) and go down to "11250"
* Press "OK" button from remote on the highlighted "11250"
* You should now see a popup window with different LNB types/frequencies
* Press up button (dial around "OK" button) and go up to "Dishpro 1"
* Press "OK" button from remote on the highlighted "Dishpro 1"
* You should now be out of the popup window and back to and highlighted on "Dishpro 1"
* Satellite # 1 (Diseqc 1) has been setup. Move on to the next satellite below

* You should now be back inside The "Diseqc Switch" Menu
* Press down button (dial around "OK" button) and go down to "Diseqc 2"
* Click "OK" button from remote on the highlighted "None" selection
* You should now see a popup window displayng all of the satellites within your CNX machine
* Press down button (dial around "OK" button),look for and go down to "Echo8/10"
* Press "OK" button from remote on "Echo8/10"
* You should now be out of the popup window and back to and highlighted on "Echo8/10"
* Press down button (dial around "OK" button) and go down to "11250"
* Press "OK" button from remote on the highlighted "11250"
* You should now see a popup window with different LNB types/frequencies
* Press up button (dial around "OK" button) and go up to "Dishpro 1"
* Press "OK" button from remote on the highlighted "Dishpro 1"
* You should now be out of the popup window and back to and highlighted on "Dishpro 1"
* Satellite # 2 (Diseqc 2) has been setup. Proceed To scan below

* Now that both satellites are setup let's scan for channels
* Press down button (dial around "OK" button) and go down to "Search"
* You should now be in the "Satellite Search" window
* It may take a minute for it to start scanning, but nonetheless, let it be and let it do its thing
* Press "OK" button from remote when scanning has completed.
* You are now done scanning.

[Hloader26]

HEy Big ! Thank you for the quick reply

[bigevil69]

did it help you any buddy

[Hloader26]

Hey Big ! I got everything Back Thx Buddy , You are the man!!!

[bigevil69]

thanks buddy glad you got it going