Suggestions for 129 Sat - ABA DSS

**brjump** · June 2nd, 2009

I have a sonicview 8000 with 8psk. I was able to get the 110 and 119 dialed in with decent sig/qual but I haven't been able to get 129 dialed in. Does anyone have suggestions for me?

Thanks!

Newbie - B

Jacques d'Boeuf · June 2nd, 2009

single lnb dish?

**gibahca** · June 2nd, 2009

or a bigger dish.
I dont think you'll be able to get it with a regular elliptical.
1000.2 is a good choice for all 3 but right now you better not waste money before more nagra3 infos.

**brjump** · June 3rd, 2009

I am using a 1000.2 dish with triple lnb

**gibahca** · June 3rd, 2009

post your settings so we can help you.
but right now the hd channels are under nagra3 system and you'll not get it anyways.

**brjump** · June 3rd, 2009

So is it just the HD channels on the 129 that are N3? I am still getting a number of HD channels on the 110 that are still working fire.

I'll have to get back to you on my settings...I'm out of town the next couple of days.

Thanks!

B

**gibahca** · June 3rd, 2009

i'm think all the HD channels on 129 are gone.
i had my motor pointed few days ago and there is nothing worth right now.
at least without a ihub for sonicview models.
I dont know with the ihub open up the HD channels too.

Triac-1 · June 3rd, 2009

Set your scan frequency to tp12516 temporarily for 129
this should give you q and sig levels on DiSEqC #3

**Itaintrite** · June 3rd, 2009

If you have an SV8000HD, get an iHUB as it will get you back the N3 channels.

As for pointing it, peak 119 signal then adjust skew/elevation and you should get 110/129. Make sure your mast is perfectly plumb or those numbers won't mean anything.