lost 110 cant find 61.5

[frostynugget]

ok i was losing channels on 110 and read to move to 61.5w. so i tried for hrs with no luck to find it. so i moved back to 110 after hrs it finally picked up a signal. then i accidentally hit over on diseq1.1 to port 2 then bam everything was gone. i switched it back but it wouldnt pick up the signal. i had a great signal my Q was 89-90. but after hrs of tuning im empty handed. ive read hrs of post to see if i can finger it out but im stumped. i have a superdish(digital lnb) with a nfusion solaris. i know they dropped n3 but shouldnt i still be able to get the sat with something to watch?
please help me

[VGiddy]

What is your Zip cose to get you your coordinates for 61.5. Unless you have HD, there is no point in finding 61.5.

[basscat02]

Try another diseq1.1 setting and see if it changes

[frostynugget]

my zip is 54304 but that helps with the hd thing for 61.5. thank you

[frostynugget]

right now i have a dp 34 switch. ill give it a try in the morning. thank you. also do you know if lnbs' go bad?

[snakebite]

yes they can and i have had it happen on a dual lnb-one side is bad but the other port is good and i use it for 82w,about 61.5 i have only one channel up histHD channel 9491,this is the only one i have found still up.

[frostynugget]

so is there a way to check if its bad?from standing behind it, it has a big one on the left side then it has a smaller digital one next to it, its just weird not to pick up any signal at all. ive tried defaulting, factory reload then bin reload.

[frostynugget]

ok i found 110 again, i think it was the switch. are there any chs left up to watch now?