Dish network help

[amsledo]

I am new to this site and need help. I have run out of ideas. I upgraded from regular dishnet work satellite to HD satellite. They out a new dish in and gave me my old one. The old dish has 2 heads on it with 4 cable connections. I was told it has a built in switch. I took this satellite and installed it at my camo and purchased a new receiver (a 311) hd it activated at home and took it to camp to use. I installed everything. I ran a double line cable to the camp . I am only using one cable that goes to the receiver. I was told the other 3 are only used if I had other receivers. I was able to find sat 110 and got all those channels. sat 119 would get a signal but wouldnt lock. If I switched cable connections I was able to get sat 119 but not 110. I figured out that all I had to do was change the settings from dish 500 to superdish and then do a switch test. After that I was able to get all the channels from 119 and 110. I took the receiver home over the winter to use and it worked at home fine. I brought the receiver back up to camp and hooked it up and found that I can only find sat 110. No matter what I do I cant get a signal for 119. The signal for 110 is real strong. Even when I switch the cables around like before, I still cant get 119. Moved the sat around and cant get any signal at all for 119. I cant figure out what could have changed. Its driving me crazy. I cant imagine the dish moving at all. I wouldnt think the cable is bad because I am getting 110 sat just fine. Any ideas?

[boboisno1]

Hello and welcome. The lnb's can go bad. Do you have another lnb you can try?

[amsledo]

No I dont. Is that the first place I should look? Or do you think it just needs adjusted?