Help with my second dish!!??

[ogzer707]

I have my dn 1000.2 dish working perfect with a dpp44 to my nfusionHD box. I have been messing around with my new dish 500 for 82 and 91.
I checked my location and i should be able to get these. But i cant and dont. Im hitting everything all around these but just not them. I have locked on 72.7 several times but cannot find 82 or 91. Whats the deal?

[jc7257]

Are you using transponder #12224 as your aiming set up number...

[ogzer707]

yes i do. and just started adjusting my dish again. woo hooo...yeah rite

[BAMPA]

When you get time would you give me the settings you are using to get 129 on your 1000.2 dish

[ogzer707]

129w echostar5
lnb--------------dplnbf
diseqc mode-----diseqc 1.0
dieqc opt.-------port 3
legacy sw-------disable

[BAMPA]

I am now running a dish 500 I get 528 channels on 110, 325 on 119 I put up a 1000.2. I lost well over half my channels on 110 & 119 and nothing on 129, so for now I have switch back to the 500, can you help?

[jc7257]

Here are the settings you should have...
Dish 1000.2 110, 119 and 129 set up…
Your ANT setting, will look like this:

110

LNB type - OCS-DP
LNB freq - 11250
22khz - off
LNB power - on
transponder - 12224
search option - all
network search - on
disqec - port 2
motor -off
legacy switch -off


For 119,

LNB type - OCS-DP
LNB freq - 11250
22khz - off
LNB power - on
transponder - 12239
search option - all
network search - on
disqec - port 1
motor -off
legacy switch -off

129

LNB type - OCS-DP
LNB freq - 11250
22khz - off
LNB power - on
transponder - 12282
search option - all
network search - on
disqec - port 3
motor -off
legacy switch -off

[BAMPA]

Are these settings for the nfusion hd with the dn 1000.2 dish

[jc7257]

Originally Posted by BAMPA

Are these settings for the nfusion hd with the dn 1000.2 dish

Yes they are...

[ogzer707]

UPDATE!!!!

So the set up i was using is wrong. I had the 1000.2 hooked up to ports 123 on the dpp44 correctly. the incorrect part was the ecoda 22khz switch. I had 91 to the 0khz and 82 to the 22khz side then to port 4. WRONG! DOES NOT WORK!
the new set up is 91 to port 4 and 82 to 22khz side of switch. then 0khz to 2nd port reciever side of my dpp44. then from the ecoda to my reciever. 91 finally is showing up on port 4! yay. not great quality only 45% but thats a huge effin improvement. scanning now. will get to 82 in a second. just have to figure out what settings for my 82????

ANOTHER QUESTION... since im using all dpp products do i need a 22khz switch? or can i just use one cable from my dish 500 into port 4 of my dpp44 for both 82 and 91?