basic elements to see FTA

Before start in this hobby, may sure at least you read a minimun of post to collect the necessary information to begin a project.

Basic elements : Compas or Brujula(spanish),valors of your location ex: long and latitud,see if you have clear visibility in the sky space where you need set your antenna .
Un FTA receiver,for domestics need a D500 or DT oval with 2 lnb separates if a dish pro lnb you can use it.
For international you need at least a 30'' with a linear LNB if mayor of 30'' is better quality.
The settings for miami ex: is 240 azimuth,139 skew and 41 of elevacion,this last is aproximatly depends in some places you need a little ajust of elevation this is for D500
A good tool for take information about sats is lyngsat.com there you found all about sats locations anyway you can use other place if you have one.
Some tools used to install a system are Drill,cube of diferents sizes,screw of wood or concrete (blues)
Each receiver come available to see FTA,other use is onder you own risk and never have warranty.
Hre in the diferents section you can found everything to put on the air many marks of receiver ,only take a little time and read inside our posts and Threads.
We are available to help you anytime.

kajod41