cw600s broke! - ABA DSS

**morc68** · February 9th, 2009

my cw600s is sick it boots but when i push the off button i do not get 00:00 i get a <u> and doesnot down load bin Carlos help THX

**painterguy14** · February 9th, 2009

Have you tried boot mode. With switch off on back hold front power button on front & flip the switch on & if this doesn't work Try & force load the factory file. When you turn it on as soon as you see boot hit start on the loader.

**creativegenius** · February 9th, 2009

The CW units are made in China and are not always of the best quality, but they are inexpensive. As an older unit, it may just be showing the signs of age.

Creative Genius

**bigevil69** · February 9th, 2009

do as painter said and let us know if that worked if not there are some other things to try

**VGiddy** · February 9th, 2009

How to revive a Dead 600S receiver

If you are having a Green Screen and when you press the Menu button it keeps changing the Green to Grey and back to Green then you can restore it in the following way. Also if it shows odd characters it could be done.

Use the 600S Factory Files

1. Pick 1.05 Loader (not the 1.04 Loader).
2. Make sure you are on the right Com Port.
3. Use a NULL Modem cable.
4. While holding the front Power button switch ON the rear switch.
5. Now you should see BOOT on the front panel of your receiver.
6. Go to the file folder shown on your loader and pick 'CX KroundV 1.13_Captive Works-25-5-2006' File.
7. Now click on Start and wait till you see End on your receiver.
8. Shut off the receiver and Switch it on with your rear switch and wait till it shows 0000 on the front panel.
9. Now press the front Power switch and you should see --:-- on the panel.
10. Now click on the file folder on the loader and select 'CX LoaderV2.50' file. and click on Start and wait till
you see End on the panel.
11. Now take the receiver to your TV and connect it and switch ON the rear switch.
12. VIOLA - you have the Captive Works Menu back again.
13. Now do a Factory reset - ALL. Select English, Time. Exit.
14. Go back to your Computer and load the Latest bin the usual way using the 1.05 Loader.
15. Do another Factory reset. Put back your settings and watch TV.

I will post the 600S Factory Files in the 600S Files section for you Guys and Gals

Have a Nice Day.

Giddy

**morc68** · February 10th, 2009

THX for your help it was and old unit i upgraded

**creativegenius** · February 10th, 2009

I see you might have checked out these files ... :

http://www.abadss.com/forum/169-cw60...tml#post588830

Did they solve your problem?

Creative Genius