SV iHUB Working Routers

[mookapyro]

TRENDnet TEW-431BRP
working great with sv-8000hd + iHub

[gajake]

Just got the dongle. ran the new software, pluged it in, set the port on my 2-wire DSL modem/router and it works. Great to see video again

[fishsmacker]

Netgear WGR614v9 working perfect hard wired.

[Priestmill]

- Actiontec GT704WB (Hard wired).
- Actiontec MI-424 WR Verizon FIOS.
- Airlink 101 AR525W (Works perfectly thru Lan ports).
- Belkin54G wireless (Hard wired).
- D-Link 604 (Wired, bridge for my ihub using linksys WRT54G V5 upgrading to DD-WRT firmware V24.
- D-Link DI 614+
- D-Link DIR-625.
- D-Link DIR-615 (Hard wired) with modem Speedtouch ST516.
- D-Link EBR-2310 (Hard wired).
- D-Link WBR2310 Router with D-Link BAP 1522 wireless bridge.
- Linksys BESFR41 with ZyXEL PL-100 power line adapters.
- Linksys WGA54G Gaming Adaptor
- Linksys WRT54G (2 power line adapters).
- Linksys WRT54G2 V1 G router.
- Linksys WRT54GL, 4 Port Wireless G Broadband Router Linux Version with DD-WRT firmware.
- Linksys WRT54GL, DD-WRT wired, Commview for WiFi, on local library open WiFi Net.
- Linksys WRT54GS (Hard wired). With Cat 5 going to Netgear 5-port switch then cable to iHUB.
- Netgear WGPS006 Wireless Print Server.
- Netgear WGR614 v6 (Hard wired).
- Seimans Speedstream 6250.
- Trendnet TEW-452BRP (Hard wired).
- Verizon FIOS actiontec MI-424 WR.
- Westell 327w DSL modem/router.
- WRT54GX4 wireless router with 2 Netgear power line HD Ethernet adapters.

[2008jay]

i need some help on iHub setup with my Uverse 3800HGV-B Gateway. Following is what i did:
- i tried with Static and Dynamic setup
Static:
------
Static ip, No DNS
Port = 1920

Dynamic IP
-----------
Dynamic IP with DNS = yes
Port = 1920, for this settings Receiver overwrites DNS address to GW address even though i put real DNS address


- created a hole in firewall to allow traffic on port 1920 both -TCP and IP for ihub
- I have check the status of server on other thread. Server is up.
- i have scanned all channels again
- user option is IHub

As iHUB is working for others, i must be doing something wrong or needs to setup something in Uverse 3800HGV-B Gateway. Any body made this work on Userve 3800HGV-B Gateway.

Thanks in advance.

[brainfade69]

in da house

Wooohooo One more Wireless setup I finally got it working.

Went to Frys and got 3 refurb Netgear wireless WPN824V3 routers @ $24.99 ea
upgraded firmware to latest version

Set one as the base station where my cable modem is and the other 2 as repeaters 1 Premier working in Living room wireless & 1 Elite in da bedroom wireless as well . hehe whole house is eminatting wireless energy hahah,

So Netgear WPN824V3 wireless works!!


If a stoner like me can do it...

peace out

Ohhh yeah I couldn't have set it up without Your guys & girls info
keep up the good work

Thanks again

[fanprettywomen]

hey any one can help. sv elite360 is down at this time or its working. I got new file 6-14 but it still scamble channel showing, thanx guys.god bless you all.

[Jim Warren]

Hi,

thanks everything is working now

jim

[matohota1992]

dose the 2wier router work was is d-link

[skincard]

Works great on:
refurbished NETGEAR WGT624 v4 (hard wired or a pair of Ethernet Adapter Powerline Kit 85mbps for $69)
Motorola SBV5220 surfboard Cable Modem

[tony864]

Originally Posted by Priestmill

- Actiontec GT704WB (Hard wired).
- Actiontec MI-424 WR Verizon FIOS.
- Airlink 101 AR525W (Works perfectly thru Lan ports).
- Belkin54G wireless (Hard wired).
- D-Link 604 (Wired, bridge for my ihub using linksys WRT54G V5 upgrading to DD-WRT firmware V24.
- D-Link DI 614+
- D-Link DIR-625.
- D-Link DIR-615 (Hard wired) with modem Speedtouch ST516.
- D-Link EBR-2310 (Hard wired).
- D-Link WBR2310 Router with D-Link BAP 1522 wireless bridge.
- Linksys BESFR41 with ZyXEL PL-100 power line adapters.
- Linksys WGA54G Gaming Adaptor
- Linksys WRT54G (2 power line adapters).
- Linksys WRT54G2 V1 G router.
- Linksys WRT54GL, 4 Port Wireless G Broadband Router Linux Version with DD-WRT firmware.
- Linksys WRT54GL, DD-WRT wired, Commview for WiFi, on local library open WiFi Net.
- Linksys WRT54GS (Hard wired). With Cat 5 going to Netgear 5-port switch then cable to iHUB.
- Netgear WGPS006 Wireless Print Server.
- Netgear WGR614 v6 (Hard wired).
- Seimans Speedstream 6250.
- Trendnet TEW-452BRP (Hard wired).
- Verizon FIOS actiontec MI-424 WR.
- Westell 327w DSL modem/router.
- WRT54GX4 wireless router with 2 Netgear power line HD Ethernet adapters.

i have a linksys already up grade to dd-wrt v24 set up as client bridge ,will this works? thanks

[roscoep]

Originally Posted by capncrunk

D-Link WBR-2310
hardwired, I didn't have to do any setup in the router

IHUB IS KING!

Cable or DSL? if DSL using PPPoE?

TNX,
Roscoep

[marcfr]

linksys wrt610n works fine

[yaas]

i have D-LINK DIR-655 will it work with i hub.....thanks in advance

[meatman10a]

360 elite, IHUB and Dlink DI-634M

Just made it wireless with a US Robotics USR 2249 802.11b access point in wireless client mode that I got for $9.99 here:
Usr 802.11b 22mbps Wireless Access Point - 2249 - - CPU Solutions=

You will first you will have to update the utility and firmware availaable here:
http://www****r.com/support/product-....asp?prod=2249

I'm pretty sure the USR 2249 will work with any router setup

[titodog]

so no motorrolla 2wire modems working

[lonster]

Dlink DIR-655 works great.

[Silnoreki105]

any linksys router.......

[fatboy0666]

i have siemens gigaset se567 can't get it to work at all.

[tucson_36]

First of all, I wanted to say that the people and crew here are GREAT!
I wanted to add a router to your list. It is a 3 year old (from wally world)
Linksys BEFSR41 - 4 wired. I was shocked when I got it to work!
Once again, there isn't a better bunch .. anywhere.