Cs5000

[hann]

I have cs5000 with bin 1*5 connected with dis*pro thru dp*44 switch. I get full strength with 1*9, 1*0, 121 and Auto roll is working fine. I get many channles from 61*5. I noticed one problem. While changing channles, I get bad or scramble chann*l. If I do hard reset (switch off the power from back of the unit), it works again but after few channle change, again it will do the same. I reloaded bin 135 just in case i got bad bin. Same result. Any idea?

[lovevann]

I have sort of the same problem. I'm running on CS6K . Some channels appear as scramble / no signal , but after just powering it off and on again. It would work.

[hann]

Can you tell me your setup? dish type, switch type, etc.

[crazymanxxx]

hey im new here and to all this fta things i need the 135file anyway i can get that here please thanks a bunch

[grasshopper]

Originally Posted by crazymanxxx

hey im new here and to all this fta things i need the 135file anyway i can get that here please thanks a bunch

Click on my signature

[gERALD55]

pLEASE SOMEBODY GIVE ME THE NEW KEYS?///

[mcgyver]

i am having trouble trying to load bins on my cs 5000 my computer will not pick it up i hit auto detect and it cant find it i have all the right cables still nothing can anyone help

[grasshopper]

something wrong with your pc. Try to updade your com port and see what happen

[gigitty]

Originally Posted by mcgyver

i am having trouble trying to load bins on my cs 5000 my computer will not pick it up i hit auto detect and it cant find it i have all the right cables still nothing can anyone help

Choose the 135 bin and load it to your reciever. The computer will not recognize the bin untill it is loaded to the reciever. After loading hit auto detect and it will be there. Auto detect only shows what is on the reciever. Make sure you are selecting the bin under the browse tab. As long a the 135 is the bin showing under file name, click the open tab...then connect. After loading it will be auto detected.

[mcgyver]

thanks for all the help i got it to work

[mcgyver]

i have a extra dish i would like to hook up and a diseqc with two spare ports right now i have ecostar 110 & 119 what would be another good signal to pick up?

[gigitty]

Originally Posted by mcgyver

thanks for all the help i got it to work

Just be patient with this bin. My unit scrambles every day. Just sit and wait on the same channel for a few min. If it doesn't come back, turn off the switch on the back for 1 min and back on. Let sit again..... It'll come back!
So far So good!!

[mcgyver]

thats what i did and now i am back on thanks

[dudeuconfuseme]

I have a 6000, it rolled but the last two numbers came up wrong. Manuelly entered, rolled to wrong numbers again. Turned off auto roll and was ok when I left. any thoughts??? 78 & 79 are off. JB

[gigitty]

Originally Posted by mcgyver

thats what i did and now i am back on thanks

The learnin curve never ends! You will love this site. The help never ends. There is always a fix!!! Just ask

[gigitty]

Originally Posted by mcgyver

i have a extra dish i would like to hook up and a diseqc with two spare ports right now i have ecostar 110 & 119 what would be another good signal to pick up?

You could go with the 91 sat. Its a canadian sat. lots o xxx and NFL there.

[gigitty]

Originally Posted by dudeuconfuseme

I have a 6000, it rolled but the last two numbers came up wrong. Manuelly entered, rolled to wrong numbers again. Turned off auto roll and was ok when I left. any thoughts??? 78 & 79 are off. JB

Did you try turning off the unit by the switch on the back for a min and back on? I sometimes have to do this a couple times before it fixes itself

[mcgyver]

sweet i will try 91 thanks