Help with settings on cs5000

[ghhorns]

OK this seems crazy I have two identical cs5000 using dp lnbs, when i do factory reset and load factory bin, then reset and load current working bin and correct settings, then go to menu, dish setting, one receiver will pick show sat119 west in top corner but i cant get the other receiver to show only 110 west? Settings are the same except for committed 119 is set to "1", and 110 is set to "2". any advice would be appreciated. Also when i go with B3V one receiver shows sats 91 & 82 and the other shows neither. Thanks alot, GH

[SatelliteJunkie]

Originally Posted by ghhorns

OK this seems crazy I have two identical cs5000 using dp lnbs, when i do factory reset and load factory bin, then reset and load current working bin and correct settings, then go to menu, dish setting, one receiver will pick show sat119 west in top corner but i cant get the other receiver to show only 110 west? Settings are the same except for committed 119 is set to "1", and 110 is set to "2". any advice would be appreciated. Also when i go with B3V one receiver shows sats 91 & 82 and the other shows neither. Thanks alot, GH

It should work fine if your using DUAL LNBs and 2 4X1 Diseqc switches.
Port 1 = 82
Port 2 = 91
Port 3 = 110
Port 4 = 119
All above go to unit 1.

On the second ports (on LNBs) run the same way to second switch & run to unit 2.

* If you had 2 CS6100s...you would just hook up to units & AutoSetup will do the rest.