184 works?

[bigfatguy]

I have no luck since this bin was loaded. My unit is auto roll for the keys and signal is good. Can anyone tell what happened? Thanks!

[bigevil69]

look in the receiver information and make sure the upgrade took

[tippster]

Originally Posted by bigfatguy

I have no luck since this bin was loaded. My unit is auto roll for the keys and signal is good. Can anyone tell what happened? Thanks!

I'm having the same problem. How do you check the reciever to see if it took the info?

[katana33]

Hi,

I have the sme problem with my coolsat 4000 pro.
The freezeng started and then it went black, I tried factory bin, back switch,keys autorol off/on and still nada.

Thanks!

[Phoxx]

Originally Posted by tippster

I'm having the same problem. How do you check the reciever to see if it took the info?

You can check the current information about your receiver, such as; model name, S/W Version, H/W Version, etc. Just hit the "MENU" button, and scroll down to "System Information."

I have been using my CS5000 for a few months. It works great!! Testers report latest BIN 184 is working excellent for them, no problems.

[bigfatguy]

Originally Posted by Phoxx

You can check the current information about your receiver, such as; model name, S/W Version, H/W Version, etc. Just hit the "MENU" button, and scroll down to "System Information."

I have been using my CS5000 for a few months. It works great!! Testers report latest BIN 184 is working excellent for them, no problems.

I checked the info,they are: cs 5KPlatinum; S/W Version:Norw-Ver1.84p; H/W Version:1.10; Boot Version:2.10(09:14); CH Version:Nov 01 2008.
Also I reset all over,but still .I know it sometimes have to change the keys manuly at ones a while,but where I can get the keys?Help please!

[bigfatguy]

Originally Posted by bigevil69

look in the receiver information and make sure the upgrade took

Thanks bigevil69! Could you tell me how to check the upgrade was took or not?

[Phoxx]

Originally Posted by bigfatguy

I checked the info,they are: cs 5KPlatinum; S/W Version:Norw-Ver1.84p; H/W Version:1.10; Boot Version:2.10(09:14); CH Version:Nov 01 2008.
Also I reset all over,but still .I know it sometimes have to change the keys manuly at ones a while,but where I can get the keys?Help please!

Just go to the "Keys" section of this web site for the latest keys, however, you should not have to enter the keys manually.

The information your receiver is giving you is that you are using the latest software fix(184) and all other info looks correct. Check all of your connections, a switch, if you're using one, and then do a factory reset. This function is also found in your stb's menu.

Good luck, let us know if this worked. If it didn't we can try something else.

[bigfatguy]

Originally Posted by Phoxx

Just go to the "Keys" section of this web site for the latest keys, however, you should not have to enter the keys manually.

The information your receiver is giving you is that you are using the latest software fix(184) and all other info looks correct. Check all of your connections, a switch, if you're using one, and then do a factory reset. This function is also found in your stb's menu.

Good luck, let us know if this worked. If it didn't we can try something else.

Phoxx,Thank you for your Help! Yes, I checked the keys and they are all updated. The connections are also good. I've been using cs 5k unit for a couple of years, so there shouldn't be anything wrong with that. The factory reset was done before my last post. Let me put more info here:
(Dish setting)
Satellite---91.0 W Nimiq 1, 3
LNB Power---on
LNB Type---Single
LNB Freq---11.250
22KHz---on
DiSEqC switch---1.0
Commited---1
Lecacy SW---SW 21 Dish 1
(Motorized Setting)
Satellite---91.0 W Nimiq 1,3
Frequency---(1) 12.224 GHz(V)
DiSEqC Motor---1.2
Move---Stop
Move Fine---Stop
Limit---Motor Control
(Autoroll Options)
All set "on"
Can you see if there is anything set wrong? Is there any upgrade file(other then BIns) for 5k unit ? I mean between Bin 182 and 184 period?

[creativegenius]

91W (B3V is down) ... and will be for some time, in all likleyhood.

You are going to want to re-point your dish (turn it) towards 110 and 119.

Perhaps do a little reading in the Dish Pointing Forum, here:

http://www.abadss.com/forum/1012-dis...ing-help-info/

Creative Genius

[bigfatguy]

Originally Posted by creativegenius

91W (B3V is down) ... and will be for some time, in all likleyhood.

You are going to want to re-point your dish (turn it) towards 110 and 119.

Perhaps do a little reading in the Dish Pointing Forum, here:

Dish Pointing Help/Info - ABA DSS - Free to Air Satellite TV Community

Creative Genius

THaks Creative Genius! The D.P.F.was read, I'm going to fix it. befor take actions, Could you tell me that can I see the pointing info on the manu to make sure the pointing degrees is right?