How To Force A Bin File on Your Receiver
How To Force A Bin File On your Receiver.
Sometimes a receiver needs to be force Loaded.
If you get stuck on boot or get ---- or if your receiver wont take a file. Force loading is basically the same for most receivers.
Turn your unit OFF from the back switch.
Open your Loader-->Find the Factory Flash-->Hold the Download Button down with your mouse-->Turn on unit-->At the first sign of lights,Release the mouse-->The BIN should start loading,If it doesn't try again.
NOTE: Timing is critical,someone to flip the switch on the unit for you will Help.
After you get the Factory Bin File to Flash-->Do a Factory Reset(Factory Default,database reset,etc)-->Load the Latest Bin File-->Fix all your antenna settings-->Scan the Sat. one at a time.
NOTE: Most units require a Factory Reset,Factory default,Factory setting,etc. After loading any Bin File. Check the Requirements for your Receiver.
__________________
Testing: 1] Viewsat ultra 2] Sonicview Premier 3] Sonicview 8000 HD PVR
Testing Sat.: {82w-101w-110w-118/119w-129W}
|
Linear Mode
