Vortex 7700 Need HELP!

[presario75]

I am trying to to load the most recent BIN for the pansat 2500a with the pansat 2500a loader to my vortex 7700 box but it is not downloading do I need another loader or bin???

[MEHAR]

Originally Posted by presario75

I am trying to to load the most recent BIN for the pansat 2500a with the pansat 2500a loader to my vortex 7700 box but it is not downloading do I need another loader or bin???

1. Open/Run the Blacklist updater included
2. Make sure BIN is Selected not BOOT you are writing a Bin
3. Click select BIN
4. Choose j27_205_1.bin
5. Reboot reciever, on first light/dash, Click write bin. let it write
When it is done, Be PATIENT!!!! let it reboot after 2-3 minutes you will see B-75 Flash on display of reciever.
6. Click select BIN
7. Choose jvvh_208_1.bin
8. Reboot reciever on first light Click write bin. let it write. let it reboot after 1 minute you will see B-75 Flash on display of reciever.
9. now Rewrite your Channel list back, BUT, BIG BUT, you must now select the 2700 settings in Channel master.
10. reconnect to Tv, select default key from parental options(key menu) let it roll
11. wait for next round

[odissseusss]

You need to convert your unit to a pansat 2700.
Read here how to: http://www.abadss.com/forum/124-pans...step-step.html

[chiswood]

Originally Posted by odissseusss

You need to convert your unit to a pansat 2700.
Read here how to: http://www.abadss.com/forum/124-pans...step-step.html

A friend of mine gave me a 2500 and i d/l what i needed non jtag conversion and tried to convert,i was using the null cable i got with my new 3500 and just kept saying error d/l failed.So i did some reading and i read that a straight rs232 null is needed to do this,is this correct.?Not the null twisted? help!

[devr95]

hello
Ineed vortex 7700 loader and bin

[pumparica]

Originally Posted by chiswood

A friend of mine gave me a 2500 and i d/l what i needed non jtag conversion and tried to convert,i was using the null cable i got with my new 3500 and just kept saying error d/l failed.So i did some reading and i read that a straight rs232 null is needed to do this,is this correct.?Not the null twisted? help!

Corect.Need straight rs 232 cable

[MEHAR]

Originally Posted by devr95

hello
Ineed vortex 7700 loader and bin

use BL Loader1.4,convert to Pansat2500a,use puff files.Then look for new files,in files download section