All in one guide for Xrica

[haddad287]

How to scan your sats
Receiver setup, Main Menu,
select Installation > Antenna setting OK
Select sat, switch set up, LNB type and either
select the green button for sat scan or exit and
select channel search, One sat search and green
button enables "BLIND SCAN" select OK

Enable the patch,
Select menu and press 13795 (a pop up window should
say enable) Press 44444 to disable patch.

Configuration,
Select time and date setting and set GMT prefrence.
Select System setting and select and turn on'
Auto TP, Dish full name, Auto roll, sid sort.
Select EPG 1-9 days and local channel numbering.

Select Tv setting to your prefrence,
Digital audio, Video out, Closed caption, RF CH ect.

If needed, Reboot receiver and let the keys roll

How to flash
1) Connect your Xrica receiver and computer by the enclosed Null-Modem cable

2) Turn on the receiver.

3) Double click the name of the loader …Loader_V31.exe

4) Click..FIND CONNECTION.. then your computer will
Find the correct connection automatically ( Com Port )

5) Select the software you want to download by clicking
the..FILE.. button and then click the software

6) Then press the start button

Note : If you press start button First …Flash memory will be erased
And old software ….Then the new software will be loaded .

7) Notice by watching the task bar in loader you can watch the progress
Of the software download .

8) When the download a message will display saing download complete.

How to edit keys manually
MENU>INSTALLATION>KEY EDIT>NAGRAVISION
Scroll Down to provider you wish to change
OK
for DN scroll over to 01 (you have 00 and 01 on the line)
OK
Scroll Down to lines you wish to change.
Use the number keys to input numbers.
For Letters
A, B, C use the number 2 key (hit it several times for different letters)
D, E, F use the number 3 key (hit it several times for different letters)

when finished hit the exit button..it doesn't ask to save...
just keep hitting exit to get back to tv screen.

How to CLONE one X-5 to another X-5
Want to CLONE from one X-5 to another X-5..It easy..
Connect the two receivers together using the supplied null cable.
Make sure that the unit that you want to clone to is turned off.
Turn on the unit that you want to clone from..Open the menu..
Go to Installation, then scroll to Transmitting Data...If you just want to
transfer the bin..scroll to transmitt software..If just the channels,
transmitting channels..for both Transmitting ALL.
The next screen will say Power on target receiver after press OK..
This means do not turn on the other receiver until after you have
pressed OK..unit will then say transmitting data...
Now turn on the unit to you want to program to..
Data will start to transfer and will show a count on the LED as the
data is being uploaded. The sending receiver screen will show the
percentage of data that has transferred. The receiving data unit
will say on the LED. ERASE first, then counting #'s...Do NOT interupt
this process as unit can be damaged by doing so.
When the data has transfered..the cloned unit will say END on the LED.
Turn Unit off and unplug the cables.

NOTE:
If you have reinstalled the Factory Bin 3.24NT, in order to upload a new bin
into the clone, the loading procedure may have changed. You may now
have to start the data transfer, then turn on the switch in the back to
start the data transfer (like a viewsat), instead of the normal way to load a bin.