|
Seesat 6000 ,how To
How to enter the key manually to seesat 6000
Enter main menu
Press Mute key on remote the font panel will display 'H'
Then input 999
Will have patch enable and enable the hide menu "fcas menu"
Do the first step again will display patch and hide the fcas menu
Enter the fcas menu will let you edit delete modify the keys...
For dish and bev it you need change menu use left or right key on remote to "Nagravision 2" system...
other way is when you make patch enable in main menu press INFO Key on remote then press 0 key on remote will have the a current key list for you edit the current channel keys
Seesat6000 step by step instructions
1. Install “Loader2” to your PC.
2. PLUG OUT YOUR STB FROM OUTLET.
3. Connect “NULL MODEM CABLE” between PC and STB.
4. Run “Loader2” on PC.
5. Run the “Tool->Configuration” menu and select serial port what you use.
6. Press “Open File” button and select the file what you want to download.
7. And then press “PC->STB” button.
WHEN ZMODEM WINDOW IS APPEARING, PLUG IN YOUR STB.
8. Then selected file will download from PC to STB.
9. When download is complete, you can see below message.
When you see this dialog on PC, STB will start to write flash memory.
Please wait until STB automatically reboot.
|
Linear Mode
