Help please...

[msmac]

Hi. The problem im having is that the channels keep going to scamble bad channel some times they come back in 1 minute. Other times i need to turn the switch in the back off and on. In 1 hour it does this every 15 minutes.
level is 97 and Quality 94. When I scan channels the Quality goes up and down from 6-94 in the green . But when all scanned it stays on 94 i dont know for a coolsat if that is normal or not. When the scamble and bad channel happens the level and Quality stays at 97-94.
I have tried bin 175 and then tried 174 bin thought it might be the bin.
So here is some info on the setup.
Im using BELL EXPRESSVU Bev . 91.w nimiq 1,3
LNB power -on LNB type -single LNB Freq - 11,250
22KHZ -off Diseqc switch- off Legacy switch - off
Hope you can help me with this
Thanks msmac

[boboisno1]

175 should be good for bev, your settings look good. Just a hint you might get better help in the cs 6000 help section.

Originally Posted by msmac

Hi. The problem im having is that the channels keep going to scamble bad channel some times they come back in 1 minute. Other times i need to turn the switch in the back off and on. In 1 hour it does this every 15 minutes.
level is 97 and Quality 94. When I scan channels the Quality goes up and down from 6-94 in the green . But when all scanned it stays on 94 i dont know for a coolsat if that is normal or not. When the scamble and bad channel happens the level and Quality stays at 97-94.
I have tried bin 175 and then tried 174 bin thought it might be the bin.
So here is some info on the setup.
Im using BELL EXPRESSVU Bev . 91.w nimiq 1,3
LNB power -on LNB type -single LNB Freq - 11,250
22KHZ -off Diseqc switch- off Legacy switch - off
Hope you can help me with this
Thanks msmac

[SatelliteJunkie]

Originally Posted by msmac

Hi. The problem im having is that the channels keep going to scamble bad channel some times they come back in 1 minute. Other times i need to turn the switch in the back off and on. In 1 hour it does this every 15 minutes.
level is 97 and Quality 94. When I scan channels the Quality goes up and down from 6-94 in the green . But when all scanned it stays on 94 i dont know for a coolsat if that is normal or not. When the scamble and bad channel happens the level and Quality stays at 97-94.
I have tried bin 175 and then tried 174 bin thought it might be the bin.
So here is some info on the setup.
Im using BELL EXPRESSVU Bev . 91.w nimiq 1,3
LNB power -on LNB type -single LNB Freq - 11,250
22KHZ -off Diseqc switch- off Legacy switch - off
Hope you can help me with this
Thanks msmac

I moved you to the correct place to get help.
It sounds to me like you have a bug in the unit...so I would do a Factory DataBase Reset & start over to fix it.
Please read my CoolSat Setup Instructions below to help. >>>