please help pansat 2300a - ABA DSS

munirdba · November 26th, 2007

i have pansat 2300a i wana know is its running or can we convert this reciver to 2500 or 2700 please advise.
thanks

**rajiv427** · November 26th, 2007

Quote:

Originally Posted by munirdba

i have pansat 2300a i wana know is its running or can we convert this reciver to 2500 or 2700 please advise.
thanks

I'm sorry to tell you that the 2300A you have is useless.You better get a good one with better support.

**arboristman** · November 26th, 2007

Quote:

Originally Posted by munirdba

i have pansat 2300a i wana know is its running or can we convert this reciver to 2500 or 2700 please advise.
thanks

that one is done buddy.
grab a 30" dish and linear lnb and point it at 123w or let it

Saafco · December 4th, 2007

l have a 2300a and it has been up and running up until last week when charlie switched. l had dish up until a couple of weeks ago. There are a limited number of channels available on both but not to many. it has served me well and it is time to get a new one. Does any one have any suggestions as to which unit is good and with good support?

**rajiv427** · December 4th, 2007

Quote:

Originally Posted by Saafco

l have a 2300a and it has been up and running up until last week when charlie switched. l had dish up until a couple of weeks ago. There are a limited number of channels available on both but not to many. it has served me well and it is time to get a new one. Does any one have any suggestions as to which unit is good and with good support?

I was in the same situation like you before,I didn't know what to buy but with the help of the Mods I got myself a CaptiveWork800PVR.It's working fine so far and it's $125.It's up to you buddy there is a lot of choices out there.Before you buy one,keep checking the download section,you can see there which receiver has good support..........Good Luck.

Saafco · December 4th, 2007

Thanks for your input. l have been looking a few different receivers, l hope that l have the same luck as l did with this one, it really paid for itself. Once again Thanks, and have a happy holiday.

mbe_stm · March 24th, 2008

Hi;

I have a Pansat 2300A. I set it to factory defualt. I am trying to flash the memory by using "PansatLG2300A_040414_223_api.bin" from Pansatusa.com, but it always fails. Any comment please.

Thanks

**haddad287** · March 24th, 2008

dude you either get a 30 inch dish and point to either 30, 97, or 123 (true fta channels) or throw that reciver out, because that reciver is dead

**grasshopper** · March 24th, 2008

Put that box to a rest my friend, it's about time to upgrade a newer one. Like that all asid, use that box for true free to air channels

GH

**Drockstar** · March 25th, 2008

I heard it is possible... You need to Jtag the 2300 to a 2500... Then use the 2500 to 2700 conversion....

If I remember correctly you will be using a jvvh file for the 2300 to 2500.... not sure the host program to use with the Jtag... If I had too guess, and you were ot worried about the box, I would try the 2500 jtag pkg on the 2300... (wall,unlock,jkeys...)