Clone 2500 to 2700 bin and manual how 2 do

[grasshopper]

Go Here:

http://www.abadss.com/forum/110-othe...tml#post105828

[duranem]

I have a Pansat 3000 Clone, is there a chance to obtain a new Bin file with autorol? A friend of mine has his Fortec Life Time Ultra converted into a Pansat 2700, and works perfectly.

My Pansat is working for a long time as a Fortec. Thank you for your assistance

[grasshopper]

Nope, there is nothing for those receivers that you mention above

[baja500]

Great Post! works perfect on pansat2500 and clones... if you have a jatg try it!

Saludos de Mexico

[feldig04]

hi, i have a pansat 2500, and i am going to convert it from 2500 to 2700, and then load the 211 bin file, but i have a motor on the dish, so how do i save my channel settings and antenna settings???

[grasshopper]

Originally Posted by feldig04

hi, i have a pansat 2500, and i am going to convert it from 2500 to 2700, and then load the 211 bin file, but i have a motor on the dish, so how do i save my channel settings and antenna settings???

write down your dish setting, convert it to pansat 2700 and scan it again

[MKII7M]

This is just what i needed.

Thanks

[raven2k7]

after conversion will my 2500 remote still work ? if not, is there a way to make it work with the receiver after the conversion ?

[Dakotahshy]

Thank you, but I dont understand the Channel Master part. Where do I find this.

[viewman]

how do iprogram my remoute after i make the conversion

[raj]

Hi, After cloning to 2700, I am unable to load the latest bin. It says downloading and nothing happens after that, can some one tell me which loader , I should be using.

I followed these Instructions and failed to load thelatest bin...

Thanks for help.
----------------------------------------------------------------

How to load bins to your converted Pansat 2500 (which is now a Pansat 2700)

Note: The current and the latest working bin for these receivers is: jvvh_213_Td.bin

- Please turn OFF your receiver
- Connect your receiver to your computer using RS 232 female-female Straight Cable
- Now open the Blacklist STB Updater 1.4.0.0
- Now, please select the "BIN" option on the Blacklist STB Updater 1.4.0.0
- Now please select the correct "COM" port on the Blacklist STB Updater 1.4.0.
- Now, please click the "Select Bin" button on the Blacklist STB Updater 1.4.0.0
- Now, please look for the latest bin and click on it (the latest bin is jvvh_213_Td.bin)
- Now, please turn ON your receiver and as soon as you see the first "dash light" on your receiver's front panel, click the "Write Bin" button on the Blacklist STB Updater 1.4.0.0
- Now, please wait and let the bin download process complete
- When it's done, your receiver will REBOOT automatically and soon you'll see B 7 5 flashes back and forth on your receiver's front panel
- That flashing B 7 5 will stop and freeze on number 5 for 30 seconds
- After 30 seconds or so, your receiver will automatically boot (It'll turn ON automatically, after 30 seconds)
- Now, please turn your receiver OFF and disconnect it from your computer

Note: After you finish with the above steps, you have to re-scan your satellite(s). After you're done with that, you have to enter the latest keys (Dishnetwork or BellExpressVu). Here's what you need to do after you re-scan your satellite(s):

- Go to MENU
- Then, go to Parental Control
- Then, go to Second Pin and enter 0000
- Then, go to Set Default Key
- Then, go to Nagravision 2 to enter the latest Dishnetwork or BellExpressVu keys

After you enter and store the latest keys, please EXIT the menu and start watching TV!

[rojosa]

Hello a new member here

[hms4]

downloaded these instructions but could not find the vor_mi.bin . Can you tell me where to find this file? I used different bins but couldn't get it going as 2700. Isn't there a way to convert a 2500A to 2700 without JTAg. Can I get a file that will do it via the serial port?

BTW, why do i have to convert the 2500A to a 2700 or any other model for that matter?

Thanks. Being patient.

[hms4]

Originally Posted by grasshopper

Go Here:

http://www.abadss.com/forum/110-othe...tml#post105828

Hello There this help link was excellent it worked first try.. I am curious. I would like to know why I had to convert my 2500A(clone) to 2700. Furthermore since I did it last nite Jan 20th I am getting bad or scrambled channel. I have legitimate b3v boxes that work fine but I cannot seem to get the 2700(converted from a 2500A) to work. Also the codes. Do key codes work just like before? Just enter them in and if they are recent they should work? Right?? Blesings.
hms4

[aksha]

This forum helped me a lot.

Originally Posted by duranem

I have a Pansat 3000 Clone, is there a chance to obtain a new Bin file with autorol? A friend of mine has his Fortec Life Time Ultra converted into a Pansat 2700, and works perfectly.

My Pansat is working for a long time as a Fortec. Thank you for your assistance

[robert123]

It worked for me. This is definitely the way to go for anyone who wants to resurrect there old 2500a's and also the best and safest way to do it. Thanks again guys! I can't say how grateful I really am. Saved me lots of $$$$

[Skyxant]

This is a clear instruction. Thank you

[baby_blue]

I already install the new bin for pansat 2500A clone. But I have this message on my screen unable to access channel...Why I Have this message???