2500A setup instructions

[md929]

Hi all,

I'm trying to download the new bin to my pansat 2500a but I'm getting an Error: Model Name does not correct I tried all these downloader:

1. 2300_2500_1500 Pansat Downloader. This is an official Pansatusa program.

2. Blacklist Updater Version 1.4

3. GTRom Loader Version 3.32. This is also the most recent Pansatusa loading utility.

Number 2 is the only one that allows me to download but it stops at 42% or somewhere near there and then it gets that flashing dashes and stays like that. I then use the "Fix for nightrider lights on Pansat2300A and 2500A" by Perezcuco to get back to factory default I think.

I've never had this problem before. Can anyone help me? thx.

[md929]

I don't think it's a clone but what will happen if it is? I used that loader before to load the 274 bin and the receiver is not showing the percentage as the loader when loading the bin and then the receiver just shows dashes going from left to right when it's done loading.

[garald]

Can anyone tell me if he has clean reception o transponder 3 on echo 8/10 ---tp 12253 I guess-
for some reason I have no quality but the signal is 71% and I do have quality for other frequencies.
thanks

[bogus]

Mine is working. Do you have the wright channel list?

[md929]

Does anyone have a channel list for the San Francisco Bay Area? I had a customized channel list from abadss sale but it got erased when I reloaded the above softwares. Thx perezcuco, got my pansat 2500A up and running. Do you have the channel list for the Bay Area? I tried to download what I purchased from Abadss Sale but it's no longer available.

[tyly]

i need help

[hdrcar]

I have been trying to load the 278 bin. It only goes to 83% on the receiver, even when it says 100% on the computer. When it is complete all I get is night rider lights. I have tried to reload at different times based on the night rider lights and nothing. What can I do?

[hdrcar]

I have the same thing going on, but mine goes to 83%. Help us.

[grumpybeto]

look for the file:
pan_2500_2300_UltraN2key, .the date of this file is 11/08/05,
when you find it load the file for ultra and that fix the ryder ,after that load the 278 file , this is the one i have working

[bigben]

does anybody know if the cable i use to download my bins on 2700a will work on 2500a?????? any help is appreciated!!

[arboristman]

Originally Posted by bigben

does anybody know if the cable i use to download my bins on 2700a will work on 2500a?????? any help is appreciated!!

nope they are different.
the 2500 is a straight through and the 2700 is a null
you can get an adapter to change them at rat shack.

[cinders]

go to parent control. 2nd pin # press 0000 go to auto roll turn off!go to nag2 put in ether 01 or 00 what ever is working that day! drop down and put in your 16 two digit nubers press ok than exit!

[cosita_racing]

Hi, you have new loader & bin file for pansat 2700A. Pleeeeease send me to cosita_racing@hotmail.com. Thankss muak

[cinders]

sorry! no new bin! i have a 2500a and channels are crashing and burning all the time!!! just gotta ride it out!! un less any one has a new working bin. thanks CINDERS!!

[aarone]

i have a panset2500a with the nightridder ----- on the display can any one help this box have been put up for 2 years what do i need to do

[aarone]

i have a panset2500a with the nightridder ----- on the display can any one help this box have been put up for 2 years what do i need to do i need step by step

[khoi_thuoc_cho_]

chao
ban co the tra loi bang tieng viet ko