why does receiver reset? - ABA DSS

hookem · May 27th, 2009

Thanks in advance for your help. 2700a receiver reset by itself while doing nothing but watching tv...channels shows scrambled or bad...reloaded 217 an 1.5 hours ago...still waiting...autoroll is on...please advise.

**mountaineer** · May 28th, 2009

Hard reboot.

hookem · May 28th, 2009

I should've said I first did hardboot as I saw it reset...then I reloaded the newest bin. Actually, it's happened 3-4 times within the past week...seemingly during big sporting events...picture did return after approx. 1.5 hrs (again). Thanks for your assistance, I appreciate your service.

**robert gagnier** · May 28th, 2009

Hi if the box has been downloaded a bunch sometimes theres to much info if the hard boot did not do the trick use the cleaner then reload fix that should do it!

**Victor Hugo** · May 28th, 2009

Make sure autorll is still turned on. Them press 8282 on the remote and scroll down to "Set default key" and press enter. Then wait, I have read of it taking just over an hour for one guy...or if you want put the keys manually,is your decision....Hope that can help to fix your problem. Good Luck.

**aairon** · May 28th, 2009

If you use the file that specificly says that it contains "embedded keys" you will NOT have to wait.
If you loaded that file of which I speak, and you don't have instant tv, then your settings are incorrect, or your stb is defective.
Good luck.

hookem · May 28th, 2009

I usually do the 8282 autoroll...then set default...after loading (and reloading) a bin. Can someone tell me about the comments above regarding a "cleaner"? I never thought it may have been loaded/reloaded excessively but apparently someone says it's possible...if so, how could I "clean" my receiver and do you recommend it? Wow, thanks again, it's nice to learn.

**boboisno1** · May 28th, 2009

A cleaner for your receiver is news to me. It might just be loading the factory file.

**shojikin** · May 29th, 2009

A couple of days ago I read about "cleaning" a receiver. It was posted by AssWhole in the thread 2700s won't come in.

**de_one** · May 29th, 2009

Quote:

Originally Posted by shojikin

A couple of days ago I read about "cleaning" a receiver. It was posted by AssWhole in the thread 2700s won't come in.

I have used a "cleaner" in the CS8100, but have never heard of a cleaner for the PS 2700. To check this out, rather than read a post,,, look for any stickies containing a "cleaner" file in the 2700 section. If you don't find one, they are either mistaken in that post, or used a different box to reference this box.
Just try a factory reset and begin again.

**robert gagnier** · May 30th, 2009

Hi aba fam got home late i tried all my tricks i cant get the channels to go N3 killed us WHAT NOW.
__________________

**boboisno1** · May 30th, 2009

Nothing to do but wait and wait and hope.

Quote:

Originally Posted by robert gagnier

Hi aba fam got home late i tried all my tricks i cant get the channels to go N3 killed us WHAT NOW.
__________________