discovery+ESPN+Cortoon network - ABA DSS

eskandari_n1 · November 20th, 2006

can some one tell why I can not discovery+ESPN+Cortoon network and other chanle,
I Already done TP scan and blind scan but still can not get them. could some help me.
thanks.

**mountaineer** · November 21st, 2006

Need to know your setup, what sats you are pointed at, and receiver ?

eskandari_n1 · November 21st, 2006

I have 2700A pansat and using 119 sat.

eskandari_n1 · November 26th, 2006

can some one tell why I can not recive discovery+ESPN+Cortoon network and other chanle,I Already done TP scan and blind scan but still can not get them. I have pansat 2700A and I am in Dallas area could some help me.
thanks.

**carpenter1** · November 26th, 2006

Your setting must not be right.

**mountaineer** · November 26th, 2006

Do you have the latest bin and newest keys on ?

eskandari_n1 · November 27th, 2006

What set up your are talking about?

eskandari_n1 · November 27th, 2006

yes the latest version I am using is288 and latest key. I had problem with several differnt version.

wifiguru · November 27th, 2006

What birds do you have your dish pointed at?

eskandari_n1 · November 27th, 2006

I have pansat 2700a , I am using 288 bin and located on Dallas area, I have problem to get Cartoon network plus others. I already sat scan and blind scan on differnt bin version. Could some please tell me what I am doing wrong? thanks in advance.

**BBMACk** · November 28th, 2006

Quote:

Originally Posted by eskandari_n1

What set up your are talking about?

1) what birds are you pointed at
2)what type of dish/lnb/switches
the problem might be because the settings on your stb dont match those of your setup...fyi cartoon network is on eco7 tp- 12443, discovery is on echo8,10 tp-12428..and espn there are several channels and on different tp..go to lyngsat.com they have a list of all the channels in each tp and bird

**BBMACk** · November 28th, 2006

dont double post you have a thread in general chit chat section with people trying to help you with your problem already...
http://www.abadss.com/forum/general-...n-network.html

**Mojo** · November 28th, 2006

Quote:

Originally Posted by BBMACk

dont double post you have a thread in general chit chat section with people trying to help you with your problem already...
http://www.abadss.com/forum/general-...n-network.html

Nice catch BBMACk

myviewsat8100 · November 28th, 2006

what LNB & Dish & switch are you useing / are all the Ch. on same tp if so bad lnb?

eskandari_n1 · November 29th, 2006

I am using dishpro with no switch. the sat are 110 and 119.

**edwinsao** · November 29th, 2006

go antena setup and check your committed if you have 110 committed 1 you must put 119 committed 2

eskandari_n1 · December 2nd, 2006

What do you mean by committed ? I am sorry I do not know what you are talking about.

**carpenter1** · December 2nd, 2006

Are you already pointed to 110 and 119?
In your equipment do you have a DP LNB or a Legacy?
From your Dish to your Receiver are there any switches?
What are the settings in the Antenna Setup area of your receiver such as Type of LNB, LNB freq. Discqe settings ?

You can tell if you have a DP LNB by the large black DP logo on the LNB.

lugame · December 2nd, 2006

Hi, I have a Pansat 2700 with the last key and Bin 287, after blind scan I can't get PPV and DTime, what can I do? Thanks.

eskandari_n1 · December 2nd, 2006

I don not have any swiches my box is directly connected (2700a) to dishpro. 18". I do see echo7,8.6,3,1.2,4 and nimq1,2. these are that I am scanning. I know there is wrong setup but I can not figure it out. thanks for help.