b75 boot upgrade guide

[arboristman]

do not skip any steps.and you should have no problems.

latest loader 27.02 can be found here:

http://www.abadss.com/forum/163-pans...-v27-02-a.html


press menu-factory setting.

load bin 116
116 here:
http://www.abadss.com/forum/163-pans...ctory-bin.html

using loader v27.02

load the boot file 75-NOT the bin yet. ("boot file only" will be checked in the loader by default,if not be sure it is)
once complete,you will see b-7-5 scrolling non stop (this is normal=good)

now do not turn off the stb at this point!!!

wile scrolling b-7-5 on the lcd:
using same gtrom loader v 27.02 load bin 120(your new factory bin from now on-save for latter)be sure to check mark "app file only" now,and hit download.

you may get "knight rider lights" at this point.(but the factory setting,and factory bin you did before you started should help reduce the odds of this GREATLY)

if you do get the "knight rider lights" don't panic.
simply keep trying to load bin 120.or any new b75 bin is ok also.
(this can be tricky,start the loader,hit download,then flip the rear switch on.if no luck,wait for the first line to scroll across then hit download,then the second,third,etc.it can take 10-15 tries even! so don't give up,it WILL load.)
once loaded your all set.and never have to worry about boot 75 again.

now,with same loader load the latest bins as normal.

loader version 27.01 will NOT WORK WITH B75 BINS!
-arboristman.

[arboristman]

your welcome.

116 is in here with old boot:

http://www.abadss.com/forum/pansat-2...ctory-bin.html

[jc7257]

Originally Posted by lildab

i tried to download v27.02 and it wont allow me to. the error says UNKNOWN FILE TYPE. i tried by just deleting everything from the comp and redoing it all and it still didnt work. what program do i need to open the file? i have nero, fireburner and an evaluation copy of winzip. i was up and running at the beginning of may and now i cant get it going again.

Follow this link and see if this will help you...
http://www.abadss.com/forum/125-pans...ade-guide.html

[arboristman]

Originally Posted by mmihir82

thanks for the information.. thanks alot.. where can i download the lastest .bin for x-87BL

http://www.abadss.com/forum/163-pansat-2700a-downloads/

check the date(most often its the first in line under the sticky post)

[jc7257]

Originally Posted by rudydb

I have a Pansat 2700 and it was working great until a couple of days ago. I purchased it already working. I thought I could load it myself but I am having difficulties, I reset the factory settings but do not know what to do now.

What loader and files do I need to get back into the game. Can anyone give me step by step help?

Follow this link and get back with us if you have more questions...
http://www.abadss.com/forum/125-pans...2700-bins.html

[rudydb]

Yes it was a clone. SkyTech 2700A

[arboristman]

to download all files upgrade memberships here:

http://www.abadss.com/forum/payments.php

[arboristman]

Originally Posted by psmfg

same thing again even with your add bar i can not open/load boot file, get the same message that its a bin file no program will open it?

you open the .bin file with the loader version 27.02

don't try and double click on a .bin file to open it.

open up loader 27.02 and THEN select the boot.

make sure you load the factory bin first! and do a factory setting before even starting.or you will be in knight rider hell lol.

follow every single step in that guide,right down to every single detail!

first 2 steps are MOST important ones.

press menu-factory setting.

load BIN 116

[arboristman]

boot updates are not fun.many people simply let someone else do them.
but i dunno.its all there there,i cant word it any better than i have.trust me i tried and did my best to state it as easy as i could.

well ok.lets just forget about the boot upgrade for now ok.lets just start off together with the basics.

1.do you have loader version 27.02?
and have you opened it up?

2.do you have a factory bin called 116 on your pc?