[maximas]

I have PANSAT 2700A (someone gave this) It is without remote, I tried
Fortec Star ultras remote and its working on Pantec.
I already download the birds and I need a help to download a fresh bin
and a way to download without USB.
Any HELP will be greatly appreciated.
THANKYOU VERYMUCH.

[bigevil69]

you need a rs232 null cable

[tb1971]

Cable looks like this:

[letisya]

Hi, am new here and I lost connection with satellite.Were I can find new cods, help me please.

[tb1971]

Originally Posted by letisya

Hi, am new here and I lost connection with satellite.Were I can find new cods, help me please.

Ok first off you need to start your own thread, your hijacking this persons thread. Tell me what kinda of stb you have, and I will direct you in the right direction.

[letisya]

I am sotty, what's the STB?

[tb1971]

your receiver, what brand is it?

[letisya]

It's Pansant 3500.

[letisya]

I have 118,but no signal, please who can help me.

[tb1971]

If you havent already you will need to upgrade your membership, and new files are
here-->>Pansat 3500A Downloads - ABA DSS - Free to Air Satellite TV Community

[letisya]

Ok, but it's closed.

[maximas]

This is maximas,
Thankyou Mr.bigevil69 I do have this cable what is next step that I should take.

[bigevil69]

download loader 27.02 & latest bin
http://www.abadss.com/forum/163-pans...-v27-02-a.html
http://www.abadss.com/forum/163-pans...8-03-08-a.html

[jose2001]

Please let as know if you fixed

[maximas]

Dear Jose 2001 Hi
I cannot do it. I try to do it exactly like the way I do it to
my VS Ultra through my USB stick. First I download bin from the sight to
my computer in my document section and from there to my USB and from there
to my stb. This time I download the loader and the bin to my computer
document section, stick my null RS232 cable to my USB slot and the other
end to my stb and try to extract the file but nothing happen, it did not show
App File only button or browser and select the "latest update" file.
And I request in the begining that I do not have USB slot in my Pantex it has
an old way to download the file that I never did before .
So please HELP me out so I can use this other box at the same time.

Thanks a lot.

[maximas]

Dear Mods & Members,
Please someone HELP me on my last post, I will appreciate
it. And thanks in Advance.

[bigevil69]

1). Turn your 2700 "OFF" via rear switch.

2). Connect the RS232C null modem cable to the receiver and Com1 port of your computer. (Use Com2 if not Com1 is not available). Note: 2500 used a straight serial cable for downloads, THIS SERIAL CABLE WILL NOT WORK!!!. You must use a Null Modem serial cable, or a straight serial cable with a "null" adapter.

3). Plug in the receiver, Turn your 2700 "ON" via the rear switch, and see that the “On” is indicated on the LED on the receiver.
4). Run the latest loader from the files section.
5. Click the App File only button, browser and select the “latest update” file, example
X-87BL_051213_140_au_api then click the Open button.
(download and extract the latest file for 2700 in the download section)


6. Double check and make sure the cable is securely connected.
7. Click the Download button, wait until the “Download Completed!!” is displayed. Watch the LED on the receiver, it should reboot itself, wait until the “On” display.
8). Wait for Unit to finish flash , DO NOT INTERRUPT!
9). When receiver reboots and displays “On” wait a few more secs until you see the "Download Complete" message on your pc. Many people unplug too soon!
You are now done with the software update.
10)scan your birds.and set default keys.(if you need help on how to scan,ask here,state what dish/lnb(s) switch etc.that you have.)

always check the pansat 2700 download section for latest loaders

note the date's before downloading.always use the latest.(unless otherwise instructed)

[maximas]

Dear Members and Mods,
I am trying to download loader and the bin in my Pansat
2700A but I do not know the old way through null
cable I never learn this technic, I do have Null RS232,and I am using it.
The USB is in its slot at the front of my computer and the other side is in
back of my stb. I had already download the Loader file and the bin file in
my document section of my computer, when I try to download it to my stb.
I cant do it. When I write down the file name in the bin field ( In configuration
window). and hit on download it says File unknown did not found.
How can I find COM Port 1,2 or 3 on my computer, I was using USB port in
front of my computer (It is known as "M" to my computer). I always use this
for my USB flash drive for downloading bin file for my other stb.
Please HELP me out of this, in a easy way, because I never did this way
before.
THANKING YOU IN ADVANCE.

[odissseusss]

maximas you need and usb to serial adapter, with the adapter you won't have any problem. The adapter comes with a software , when you connect the adapter and run software it will appear a new com port. The cable you are using i think won't work for you. You can find them at rat shak or any other store.

[maximas]

Yes Sir,
I do have a USB Serial Adapter from Airlink 101 it has come with
Installation Guide and Driver CD, I have install the driver and its in
my "F" Drive. The USB side goes in the computer and the other side
nine pins goes in my stb.
I would need help in how can I bring my box to life, In my previous post
I had explain what I have did so far this is my first time downloading
through this USB Serial Cable which is not as easy like we do with USB
Flash Drive. This is lengthy and tricky, I would like help to know that
trick,so Please HELP me I will thankyou in Advance.