entering keys guide 2700/3500

[arboristman]

most of the time we have autoroll bins but still often we have to enter keys via remote.here is a simple guide to show you how.

1.go to "cas system"
two ways to get here,simply go to any channle and press 8282 on the remote.
or press menu/parental control and enter SECOND pin (this will be the 4th line down.) this password will be the same as the reguar pin 0000.(1668 is master and will work also.)

this is where you will be now:

[arboristman]

2.now scroll down to nagravision 2 and press ok.
you will be at provider id 01 01 (dn)
key number 00
simply enter 00 keys that will fill both lines and be sure to press ok on remote to save them.
this is where you will do this:

[arboristman]

now simply scroll up to key number and press right on remote once,
you will see it change to 01
simply enter 01's keys here that will fill up both lines,
and press ok on remote to save them.
this is where you will do this:

[arboristman]

for bev's keys you simply scroll up to provider id and scroll right once to see it change to 09 01 and enter keys 00 and 01 with latest keys for bev.

for globcast keys,simply press right once again to see provider id C1 01
and enter latest gc keys.

its common to input just 1 key off, or forget to push save button after inputing each set of keys,or to put old keys in when you think they are the latest.so take your time finding the newest keys,and double check them to be sure you put them all in correctly.

sometimes you will see only the "active" set of keys posted,thats ok. simply see if they are 00 or 01's keys,thats all that has to be changed,the other set is not active and can remain old untill a new active key replaces them.

in some cases,they will make both 00 and 01 active at the same time,the poster of the keys should mention this so you are sure to put both sets in.


another tip to remeber,on the remote the six buttons in the middle used for the letters,starting with pause (a) audio (b) epg (c) last (d)
see that straight order on the remote?
saves time rather than to keep looking for wich button repersents wich key.
then just rember fav (e) sat (f) another straight line aslo just under a-d.get used to that and you should be able to load keys real fast and get back to tv.

there you have it,putting keys in via remote made easy.

now who said we needed autoroll for such an easy task anyway buddy.