I Give Up

[RASKACIELO]

tried numerous time to revive my pansat. i made three jtag cables and nothing. i even checked to see if the power converter is working.************h. need help someone.

[odissseusss]

Ok take it easy lets recheck all you have done so far.

First can you post what configuration you use to make your jtag cable?? Did you put the 5 100 ohm resistors???

[toe]

dont give up yet,the dudes that work for this site will do everything they can to help you, they have done it before and will most likrly help you till hell frezzzzes over!!!!

[tb1971]

If you havent already, dont give up buddy, stick with us, we will get ya going.

[RASKACIELO]

Originally Posted by odissseusss

Ok take it easy lets recheck all you have done so far.

First can you post what configuration you use to make your jtag cable?? Did you put the 5 100 ohm resistors???

first of all thanks for replying.
ok, yes i put the resistors.
the first cable i used i bought so it was ready to go. nothing the programs didnt work at first cause i didnt program it run run with windows 98. so i did another cable after figuring that out. i got skymax to work and i got to do the erase but when i went to "write" i didnt know i had to switch to "all files" to get the file to put, so i closed the program. i figured that part out but now, again , i cant connect to the unit. this is what comes out:

Init JTAG
IDCODE : FFFFFFFF
Fail DCU, Plesae Restart or Reset CPU Box

[RASKACIELO]

Originally Posted by odissseusss

Ok take it easy lets recheck all you have done so far.

First can you post what configuration you use to make your jtag cable?? Did you put the 5 100 ohm resistors???

first of all thanks for replying.
ok, yes i put the resistors.
the first cable i used i bought so it was ready to go. nothing the programs didnt work at first cause i didnt program it run run with windows 98. so i did another cable after figuring that out. i got skymax to work and i got to do the erase but when i went to "write" i didnt know i had to switch to "all files" to get the file to put, so i closed the program. i figured that part out but now, again , i cant connect to the unit. this is what comes out:

Init JTAG
IDCODE : FFFFFFFF
Fail DCU, Plesae Restart or Reset CPU Box

[odissseusss]

Ok if you have the dcu error that sometimes happens due to a ground issue in the jtag cable. If you will like to try , take a wire , you can use one of the receiver chassis screws , and ground the receiver , be advice do not use the positive or negative of any outlet must be a real ground. after that try the wall and jkeys program.

[RASKACIELO]

Originally Posted by odissseusss

Ok if you have the dcu error that sometimes happens due to a ground issue in the jtag cable. If you will like to try , take a wire , you can use one of the receiver chassis screws , and ground the receiver , be advice do not use the positive or negative of any outlet must be a real ground. after that try the wall and jkeys program.

ok, u mean ground the receiver to the house ground.
i will try \.
thanks.

[RASKACIELO]

still nothing.....

[odissseusss]

hmm ok the only thing left to do is check how did you conect the 20 pin heather in the jtag?? can you post a pic or how did you put it??