A Guide of how to manually enter keys.
Here, below is a guide from me that tells you on how to manually enter keys on a CW-600s Reg.
1>Go to main menu. 2>Scroll to SYSTEM SETTINGS. 3>Scroll to OSD.
4>Scroll down to the bottom, and turn auto roll to off. 5>Now exit everything
5>Go back to menu and scroll down and select accessories. 6>scroll down to KEYS and select it. 7> Now you are at the key menu. 8>Press the left arrow on the remote and now you are at NAGRA2. 9>for Bell, scroll down to BEV and enter the keys. *For the index, here is an example, for the index '86' on BEV is '00'.
*For the index '96' on BEV is '01'
*Same thing for Di$h. 10> You are done.
WARNING: USE THESE INSTRUCTIONS AT YOUR OWN RISK!
*Manually entering keys usually does not work.
|
Linear Mode
