Cw 600s Constantly freezing

[pegelo101]

I hoping that someone could help me out with some good advice. I just loaded the new bin (1.56) and now my reciever freeze's everytime I try and change the channel

thanks

[coorslightly]

there farting around with the datastream the last 20 minutes. just switch to another channel .

[pegelo101]

still having troubles. Reciever freeze's no matter what channel I select, and every time I reboot it go back to the original channel it is stuck. any other idea's?


thanks

[thegrudge28]

Originally Posted by pegelo101

still having troubles. Reciever freeze's no matter what channel I select, and every time I reboot it go back to the original channel it is stuck. any other idea's?


thanks

Yes i had the issue before.. reload you bin and do in in standby mode.. you probably loaded in boot mode im i right?

[savage31]

Happen to me
Reboot from the back switch
When it's booting up keep pressing the channel button
up or down to change channel
Now your 600s should not be frozen
Do a Factory Default
Rescan your satellite
Enable channel F1 000
And you should be ok

[restorerancient]

Originally Posted by pegelo101

still having troubles. Reciever freeze's no matter what channel I select, and every time I reboot it go back to the original channel it is stuck. any other idea's?


thanks

If the other ideas don't work out.Try this unplug your stb , unscrew the lnb cable from the back of the stb.With no lnb and of course no signal the stb or box will be unfrozen .Then do a hard reset by plugging the stb in and holding the power button down and turning the power on from the back.Then load the 1.56 bin.
This has helped me in the past.

PLEASE BE SURE AND UNPLUG THE POWER CORD BEFORE UNSCREWING THE LNB CABLE!!!