crazed and confused - ABA DSS

iceman_nc · April 2nd, 2008

ok, this is a cw600s and it had a factory bin loaded back on it (bringing it back to factory state) then the latest bin file was loaded on it,,all this took place before i found out it had no remote control with it, so it has been figured out how to scan the sat (bev 91)without a remote, but the dang thing just says scrambled channel, it will not update, so what would a puzzled person do in such a case....thanks

**jc7257** · April 2nd, 2008

If you had the remote, you could enable the patch. This is how to get it to work. On the remote hit F1 and then 000...

iceman_nc · April 2nd, 2008

Quote:

Originally Posted by jc7257

If you had the remote, you could enable the patch. This is how to get it to work. On the remote hit F1 and then 000...

so i need buy a remote...got a loaner...lol

**bel71281** · April 2nd, 2008

the new bins Added front panel controls to Enable Patch. Put box in standby mode then press OK Button then VOL+ Button, VOL- Button and then box should turn on and Patch should be Enabled.

**woodcreeker** · April 2nd, 2008

Of course, who would want to watch TV these days without a remote.

You can find a new replacement remote on eBay.

skibum07 · April 2nd, 2008

Along these same lines I have the same problem with the scrambled channel, I have sound with no picture and patch enabled, I have a remote but no picture can anyone help. I'm using 91 for B*V, should be correct, I think, thanks for any help.

**boboisno1** · April 2nd, 2008

I'm old enough that I was my dad's remote for many years before they were invented, you can always get a youngster to change the channels for you.

**kandistarr** · April 3rd, 2008

My CW600 Is Down

**restorerancient** · April 3rd, 2008

Quote:

Originally Posted by iceman_nc

so i need buy a remote...got a loaner...lol

if you have a old hughes direct tv reciever remote it will work , at least it was posted to work a while back on here.also you can go to a site sponsor ftapros and they have the captiveworks universal remote that is a great upgrade and a nice unit for all captiveworks products.

**restorerancient** · April 3rd, 2008

Quote:

Originally Posted by kandistarr

My CW600 Is Down

all are down right now go to fta news and announcements for any news related to providers being down.

**asg** · April 3rd, 2008

can i use a dtv sat and their lnb to get sat91for bv

captjames · April 3rd, 2008

Skibum07- turn the power off and back on from the switch in the back. Should fix the problem.

ASG- yes

iceman_nc · April 4th, 2008

Quote:

Originally Posted by bel71281

the new bins Added front panel controls to Enable Patch. Put box in standby mode then press OK Button then VOL+ Button, VOL- Button and then box should turn on and Patch should be Enabled.

no luck..but thanks