some channels still scrambled

[angie1959]

I Have About Half Of Channels Scrambled,i Can Reboot On Those Channels And They Will Come On ,but As Soon As I Change Channels They Go Back To Being Scrambled. Any Ideas On What I Need To Do To Get All My Channels

[basscat02]

Give us your dish/LNB type and settings. Check your quality/signal , should be 70% or more

[angie1959]

My Dish Is Dish Tv 1000 STRENGTH & QUALITY GOOD

[basscat02]

OK, then we need your antenna settings please

[angie1959]

Echostar7 Transponder 12398

[basscat02]

On your antenna setup page you should have something like:
LNB Type
LNB freq
TP Freq
Diseqc 1.0
Can you give me those numbers you have

[angie1959]

Lbn Type normal Lbn Fre 11250 Transponder 12398 Diseq Lbn2

[angie1959]

i have no ppv channels either

[basscat02]

Try these if you have a 1000:
LNB Type-OCS/DP
LNB freq- 11250
Diseqc 1.0--Port 1 for 119
Port 2 for 110
Port 3 for 129 or whatever you have
TP frequency -12224

[angie1959]

channels show scrambled but can reboot and they come on tell i change channels,then they go back to scrambled

[basscat02]

What satellites are you getting?

[angie1959]

echostar7 echostar6,8

[basscat02]

I still think your settings are off. Try changing LNB type to standard, LNB freq is 11250, TP freq for Echo 7 is 12239 and I think 12224 for Echo 6 . Are you running througn=h a switch or going straight from the dish to the receiver. If you are using a switch, Echo 7 will be Port 1 for Diseqc 1.0 and Echo 6 will be Port 2. If no switch, then Diseqc 1.0 would be none. Get your settings right according to what I have given you. If it doesn' work then change LNB type to try all other settings.

[basscat02]

Hey angie, how you coming along?

[basscat02]

If things are not working out, let's try something else. Make sure your A/R is on if you are running cardless. Check your keys, if they are not correct and A/R is not keeping right , put keys in manually