Menu key does not display MENU

[colt45rbc]

Good day all. Everything working as normal last night. This am,turned it on...nothing..black/green screen. F1000 gets me an off-colored screen with picture. Red &green lights are on,with volume & no EPG. When I press MENU, it goes to the menu background format but with green colour & no setup screen. I searched the sites & it was mentioned to re-load theCX_KroundV1.06_24138Chip ..this didn't load. Any help would be greatly appreciated. Not a newbie at this, but haven't experinced this before....THANX

[monoxid]

Did you try a hard re-boot. That is using the rear switch. Works quite often.













span.jajahWrapper { font-size:1em; color:#B11196; text-decoration:underline; } a.jajahLink { color:#000000; text-decorationne; } span.jajahInLink:hover { background-color:#B11196; }

[colt45rbc]

Thanx...tried that, MENU key does not display set-up screen???

[MgGibson2]

Have you tried this...?

Just kiddin'.............are you loading with usb/sd or null modem cable?
TRY NULL MODEM LOADING TO FORCE AN OLD WORKING
FILE IN...THE LAST BIN USED MAYBE...MIGHT FREE IT UP?

[colt45rbc]

Can't find my hammer at the moment! using null cable with latest bin!

[MgGibson2]

Try some older files to see if any free it up...The problem may be in your current file.

[colt45rbc]

Great minds think alike. Just reloaded 2.17...same situation...press menu & get green screen...re-loaded 2.08 the same???

[MgGibson2]

I'm doing some checking right now...found a couple areas with "green screen" issues... BRB

[MgGibson2]

try this database file...."green screen" Fix...

http://www.abadss.com/forum/169-cw60...en-screen.html

[colt45rbc]

I saw that , which loader would I use??? And where...at "boot" or --:-- prompts...thanx for your help so far... Rob

[MgGibson2]

Using your regular loader software, load this as "download data". This should fix the "green screen" syndrome. After loading, you may have to re-do your antenna settings and re-scan.

1.05 loader...

http://www.abadss.com/forum/169-cw60...on-1-05-a.html

[colt45rbc]

Ok...do I use this at "boot" or --:-- prompt??? Thanx

[MgGibson2]

That my friend i do not know...the same as you would a bin file i assume...
that is your call there...(here is a complete archive of cw600 info something in here should help you get 'er goin')

CW600 Downloads [Archive] - ABA DSS - Free to Air Satellite TV Community

[MgGibson2]

instructions on database file load:

c/p.
Bin file to remove the green screen
For those that may have a problem with green screen as well as the remote control does not respond hence can not enter the menu or change anything or do a factory reset in their enclosures cw 600 regular, here we find the solution to my I personally worked with me just use the loader 1.05.

The first is to open the loader and select the 1.05 bin kround, that it is in the file, turn on your computer previously connected to the PC with the cable **** null and click to start, after indicating that end, select the kround loader 2.50 click and give a start, after which aprezca end, selecting the last bin and downloaded on a regular basis.
Just set up and should re-scan the channels and ready, press F1 and continue watching tv 000 free.
End c/p

[colt45rbc]

Allrighty then..I'll try it at the --:-- first & see what happens, if nothing I'll try the boot prompt...thanx

[colt45rbc]

This is what I'm going to attempt...start from scratch??
Did "dead box" procedure & voila...back up & running FINE...THANX AGAIN

[MgGibson2]

Originally Posted by colt45rbc

This is what I'm going to attempt...start from scratch??
Did "dead box" procedure & voila...back up & running FINE...THANX AGAIN

Good deal....Glad to hear you're up & runnin' again !
Thanx for the feedback !!

so you won't be needing this after all ???
he he he =)

[creativegenius]

Glad to hear you got'er going

Creative Genius

[colt45rbc]

Just found my 10lb sledge hammer!