Please Help Setup new captive works 600-s Premium

[Arlie14]

well i tried that and i am still getting duplicate channels. I scanned 119 and 110.Also I dont see my local channels.

[Arlie14]

Oh and yes I found matches it says found 17 EchoStar 7 (119.0W)and settings are 12224/v/20000/5/6
11250
ocs-dp
off
lnb1

[palpon]

Odd,odd,lets see ocs on e7=1 e8=2,click menu>highlight accessories ok>highlight config city ok>use channel down to find your state ok>use channel down to find your city ok and exit. Do another review of your scanned channels.

[Arlie14]

Hello I am still trying to setup my cw600 premium and I am still having problems. I was doing a signal look up and it says that I should use 119 echostar 7 and 110 echostar 8/10. I have the echostar 7 but I dont have the echostar 8/10 but I do have echostar 6/8. Is that the same or what should I do ?

[arboristman]

Originally Posted by Arlie14

Hello I am still trying to setup my cw600 premium and I am still having problems. I was doing a signal look up and it says that I should use 119 echostar 7 and 110 echostar 8/10. I have the echostar 7 but I dont have the echostar 8/10 but I do have echostar 6/8. Is that the same or what should I do ?

yes use echo 6,8 thats what 110 used to be,the coders just havent changed that to echo 8.10,but its the same thing 110.
and that one will be same setup as your 119 bird only difference will be diseqc port 2

[Arlie14]

Hello does anyone know where I can get a master channel list with my locals from the Fresno, CA area. I think that is what I need is to load a channel list !!! Please help Someone or show me how to add my local channels ............

[arboristman]

Originally Posted by Arlie14

Hello does anyone know where I can get a master channel list with my locals from the Fresno, CA area. I think that is what I need is to load a channel list !!! Please help Someone or show me how to add my local channels ............

did you get both sats scanned in?
your locals will scan in automatically,in only takes a min or 2 to scan a bird.much faster than loading a list anyway.

[Arlie14]

I did get both scanned in but I still have no local channels. Im not even getting all ppv channels. I am getting alot of LA local channels............

[palpon]

Arlie, DID YOU SET CONFIG CITY?

[Arlie14]

Im sorry yes I did config city .......

[arboristman]

if your missing allot of ppvs then something is still wrong in your setup.
or your dish is not aimed correctly yet.

[arboristman]

be sure your getting quality readings for all tp's (minus some spotbeams locals of course)

110:
DISH Network on EchoStar 8/10 at 110.0°W - LyngSat

119:
DISH Network on Anik F3 & EchoStar 7 at 119.0°W - LyngSat


you will see the tp's on the left.
in setup,go to the bird and push ok on the tp's and change each one and compare to lyngsat.be sure you have quality on each,once you fine tune your dish in to get them,delete all channels and rescan.