When i go to scan satellites 110 and 119 i get signal and quality at 95 to 100 percent. As soon as i start scanning and the first set of channels are found the quality goes down to zero then after a little while it goes back to around 70% and everytime a new set of channels is found the quality goes down to zero. any ideas why this is happening.
On another note, are all the PPV channels on 110 and 119? I've tried scanning both satellites with no luck. Could the problem above have anything to do with it?
You antenna settings don't match your dish and LNB so tell us what type of LNB you have it set to.
Or you can try yourself by looking at your LNB type and if you have it set to DP then set it to single or standard depending what the receiver has. And if it's on single then change it to DP.
__________________
The Following User Says Thank You to carpenter1 For This Useful Post:
You guys are the f**# best! I followed you instructions, and everything works great. Thanks!!!!!
Quote:
Originally Posted by carpenter1
You antenna settings don't match your dish and LNB so tell us what type of LNB you have it set to.
Or you can try yourself by looking at your LNB type and if you have it set to DP then set it to single or standard depending what the receiver has. And if it's on single then change it to DP.
Can u tell me how to set the sat back i have the same problem
ok if its the same problem,then you probably don't have the settings correct either.
let us know what you have for an lnb/switch/dish/motor etc.
and we can then help with your settings.
__________________
Latest FTA News --- ABAdss Blog
SV-HD8000-ATSC-PVR-V2 7100usb'600spremium Ipro 2000 Plus pvr & Ipro 2000 pvr mini pvr''''''''S550 wintv-pvr-150'''''''8x1DiSEqC
Linear Mode
