Quality Lost

[deanluna]

I'm running Bev.,.,.,and the quality is at 0.,..,are we getting hit?

[RICKSBEACH]

Still working, must be you.

[woodcreeker]

Well if your quality goes to zero...

1) A storm may be coming that is blocking reception.

2) You simply could have something obstructing your dish. Plants tend to grow in the way this time of year.

3) Check the dish to see if it got moved.

4) You may have a loose connection from switch to cable to lnb, or a bad cable there.

5) Change your lnb type from Standard to OCS-DP, or from OCS-DP to Standard .

6) You may have to rescan your channels in, as tp autoupdates have been running rampant lately due to having an old channel list. Channels are being changed around a lot, lately. The best thing to do in this case is write down your dish antenna settings and do a factory reset with factory default. Setup dishes again and rescan in channels.

Bev is running fine here.

Good Luck.... hope you figure out your problem !!

[deanluna]

well it's not just me.,.,.,it's a bunch of people in my circle.,.but I just checked the radar and I guess it could be a storm.,.,.,thanks for the quick reply and for the tips

[mr shady]

Likely the weather we are calling for storms in Ontario all day and night

[carpenter1]

Bev is playing tricks again because I noticed i have been loosing Quality on 91 and just got 119 hit for 1 minute too today but all seems fine for now.

[Randolf]

seen some temp channels come up on DN after fresh scan, had my Q% drop on Bev also, they are definitely playing, let the games begin!

[RICKSBEACH]

Do we suspect some trouble on the horizon soon?

[mr shady]

GREAT hope its not too bad!!! Or too long

[carpenter1]

From what I've seen they are testing the waters and if they like what they see then we will be hit. First they have to make sure that their own receivers don't go down.

[dallas62]

hi guys i have 3 pansats 2700, 2 working ok but 1 diplays 0... quality. i did factory setting, and try to rescan, and says 0...transponder found?... i need help. thnks.

[woodcreeker]

Originally Posted by dallas62

hi guys i have 3 pansats 2700, 2 working ok but 1 diplays 0... quality. i did factory setting, and try to rescan, and says 0...transponder found?... i need help. thnks.

Do factory setting again. Be sure the satellite in was connected to thge right port in. If no quality when you set up satellites, be sure if it's echo 7, it has a TP <[2] 12239 H 20.000>.

If still no quality, factory setting again, write latest bin file one more time.

Try setting up satellites again, if still no quality, check the sticky post for bad capacitors.

Hope it comes back!

Good Luck !!

[goofy]

Where can I find a flash for the CaptiveWorks CW_600s preminum