bev to dishnet signal

[kat71]

we are hooking up the captive works dishnet satelite we're trying to turn the dish to catch the signal right now I've found the bev nimiq 1 signal but I'm looking for the dishnet echo 7 signal can anyone tell me if I'm very far off or what direction I need to turn the dish to catch that signal
Thanks Kat

[bigevil69]

keep moving it from west to south slowly not to far away nimiq is 91 echo 7 is 119

[Apocalypse_67]

If you stand behind your dish, echo7 is about 20 degrees to your right.

[arboristman]

yup if your hitting bev,you need to go west.its quite a bit,the dish wont look likes it pointed anywhere near bev when your done.
be sure to set your elevation first.
see here:
FTA Downloads - ABA DSS - Free to Air Satellite TV Community

you should hit it in just a couple mins.if you hit 101,you wont see the unit tell you where your pointed.so go west a bit more.

[arboristman]

oh.be sure to setup echo 7 of course.and use tp 12239,that ones active.

[basscat02]

Make sure you see Echo 7 on both sides of your setup screen before you scan it