Channels...........

[haddad287]

I have loaded the DN&BEV Updated Long Channel lists and it is working perfectly but is it possialbe for after it is renamed? I can then go edit like 4 or 5 channels or not? because I tried to rename for example The N into Nick GaS It dident let me until I put the DN&BEV names on OFF so is it possiable to rename as the functuionif it is on Off?

[arboristman]

now your looking for channel master.
good luck,its pretty easy.

[haddad287]

Originally Posted by arboristman

now your looking for channel master.
good luck,its pretty easy.

I got a question after you did FROM STB TO COMPUTER, does it delete all the channels in the STB? or doesent it?

[arboristman]

no.its just makes a copy on your pc too.

also,don't forget to save the list to the stb itself before you start.then if anything goes wrong,you can simply load it back.

[haddad287]

Originally Posted by arboristman

no.its just makes a copy on your pc too.

also,don't forget to save the list to the stb itself before you start.then if anything goes wrong,you can simply load it back.

How do i save my chanel list?

[Crazy CW]

Originally Posted by haddad287

How do i save my chanel list?

ya I would also like to use channel master, I dont like how the bin renames that channels for you

[vtoskov]

check out the sticky guide made by arboristman.
http://www.abadss.com/forum/133-cw600-premium-help/26816-channel-master-your-premium.html

[haddad287]

Originally Posted by vtoskov

check out the sticky guide made by arboristman.
http://www.abadss.com/forum/133-cw600-premium-help/26816-channel-master-your-premium.html

Yes I saw that but he said to save my channel list? and I dont know what he means by that

[arboristman]

with the captiveworks premium you can save your list.(a channel list always saves user settings also)right in the receiver itself.
go to menu>system setting>user channel list.(save and load options)
now,no matter what you do,you can always go back where you started from.

[haddad287]

Originally Posted by arboristman

with the captiveworks premium you can save your list.(a channel list always saves user settings also)right in the receiver itself.
go to menu>system setting>user channel list.(save and load options)
now,no matter what you do,you can always go back where you started from.

KK so aftter I save Channel List, will it like be saved in the reciver as the defualt? Channel list? so if I mess up I just load from the reciver by loading it right?

KK so am I doing it right please tell me
-Open loader 1.06
-select COM port and select UPLOAD DATA
-have STB on from the back but off from the front
-click START
-then the % will finish and you will see on the recvier -END
-then turn STB off and on from the back to clear it
-open channel master
-then go to FILE, IMPORT, CW 600S

Then I can edit it?

[arboristman]

looks like you got it buddy.
have fun.

[haddad287]

Originally Posted by arboristman

looks like you got it buddy.
have fun.

when I click go to import in the CM I see these follwoing options
-Wizard...
-Template...
-Open Project From Web...

Which one do I choose, because I dont see CW 600S unless I clcik on template thant I can broswe for a file, is that right?

so if I FOLLOW EACH AND EVERY STEP OF THE PROCESS, I dont have to set default key and patch enable?

[vtoskov]

Just use the File>Open, Change to all file types, and open your .sdx file. Once you are finished editing it, save it. After you save the .sdx file with CM and upload it to your CWP with its loader you'll probably notice that each channel "blinks" for a fraction of a second when you first tune to it. This is not a big deal and will only happen once for each channel. I think some bit of information gets lost in the process and the CWP just has to relearn it.

[haddad287]

Originally Posted by vtoskov

Just use the File>Open, Change to all file types, and open your .sdx file. Once you are finished editing it, save it. After you save the .sdx file with CM and upload it to your CWP with its loader you'll probably notice that each channel "blinks" for a fraction of a second when you first tune to it. This is not a big deal and will only happen once for each channel. I think some bit of information gets lost in the process and the CWP just has to relearn it.

So ur saying if I load a channel list my channels wil BLINK! if thats the result I am not going to use Channel Master

[vtoskov]

it happened to me, but it's nothing to scare you away, I used CM long time ago, so maybe with the newer versions this bug has been fixed. But even if it's not, the blink is barely noticeable(half a second) and you'll only notice it when you tune into the channel, no blinking afterwards while watching. But let me know if they fixed this bug or not, I am curious, since I haven't used CM in over a year.

thanks

[haddad287]

Originally Posted by vtoskov

it happened to me, but it's nothing to scare you away, I used CM long time ago, so maybe with the newer versions this bug has been fixed. But even if it's not, the blink is barely noticeable(half a second) and you'll only notice it when you tune into the channel, no blinking afterwards while watching. But let me know if they fixed this bug or not, I am curious, since I haven't used CM in over a year.

thanks

Give me the link to the latest and newest channel master please, I dont know which one to download

[vtoskov]

Originally Posted by haddad287

Give me the link to the latest and newest channel master please, I dont know which one to download

http://www.abadss.com/forum/37-chann...23-2007-a.html

[haddad287]

Originally Posted by arboristman

looks like you got it buddy.
have fun.

Can I ask you something, will th channels blink if I use channel master?