help

[kickmex]

i have trouble with my equipment,when i charge the new bin this dont start ,i did this before whit other dealer and the bins and the equip do it ok ,can you help me.

[edwinsao]

Originally Posted by kickmex

i have trouble with my equipment,when i charge the new bin this dont start ,i did this before whit other dealer and the bins and the equip do it ok ,can you help me.

you have to turn off the receiver from the front power switch and leave in standby then you can load your file

[kickmex]

yes i do that ,but i cant see the bin work yet ,the bins are the same for all dealers ,my last dealer show me how to charge the bin ,the computer work fine ,my equip is cw600s premium wich is the righ bin for this equip.
thanks

[haddad287]

Originally Posted by kickmex

yes i do that ,but i cant see the bin work yet ,the bins are the same for all dealers ,my last dealer show me how to charge the bin ,the computer work fine ,my equip is cw600s premium wich is the righ bin for this equip.
thanks

After your reciver is in Standby Mode open loader 106 and broswe for the 169 bin, then choose your com port then click on Start, once reciver displays -END you can dissconnect from computer and back with the satellites and TV

[arboristman]

you need the 106 loader and v169 file.
turn rear switch off.
hold the front power button.
turn rear switch on.
let go of front power button now.
receiver will read "boot"
start the transfer.

[kickmex]

ok i think my loader dosnt work maybe its from my old dealer ,where i can download the loader you said

[painterguy14]

In the Cw 600 premium downloads section.(Loader 106)

[rajiv427]

Originally Posted by kickmex

ok i think my loader dosnt work maybe its from my old dealer ,where i can download the loader you said

Go here for the loader:http://www.abadss.com/forum/170-cw60...-v-1-06-a.html