one 600sp working one not - ABA DSS

**admsjp** · January 19th, 2008

i have one 600sp i have had for o long time. i just purchased a new one. i loaded bin 169 and enabled the patch and went through the whole steps to first hooking up my reciver and this new one only says scrambled channel. my first 600sp is on bin 168 so i tried it and still the same problem does anyone have any suggestions?

thanks verry much
admsjp

**rajiv427** · January 19th, 2008

Try to reeboot your receiver or wait for the key to update and see what happen.It might take a couple of minute.

**admsjp** · January 19th, 2008

thanks i will try that

**admsjp** · January 19th, 2008

i tried that and still nothing so i am loading the factory bin on it and i am going to try it again and load 168 cause i know it is still working if you have any other sugestions that can help thanks in advance

**painterguy14** · January 19th, 2008

Load factory bin followed by bin 169, do a factory default, set your settings(make sure your autoroll is on), Enable patch & let sit on a movie channel, Could take 10-15 mins for keys to roll in.

**rajiv427** · January 19th, 2008

Quote:

Originally Posted by admsjp

i tried that and still nothing so i am loading the factory bin on it and i am going to try it again and load 168 cause i know it is still working if you have any other sugestions that can help thanks in advance

Check in the Key menu if the keys are the same as the one posted.If it is the same then there must be something wrong with the setting.

If it is not the same then try to edit the keys manually and see what happen.

**haddad287** · January 19th, 2008

Quote:

Originally Posted by rajiv427

Check in the Key menu if the keys are the same as the one posted.If it is the same then there must be something wrong with the setting.

If it is not the same then try to edit the keys manually and see what happen.

Do you got BEV and DN channels with the 169 bin rajiv?

**rajiv427** · January 19th, 2008

Quote:

Originally Posted by haddad287

Do you got BEV and DN channels with the 169 bin rajiv?

I don't know because I don't own a CW600p but since 1.69 is the latest bin,you should be able to watch TV.

thasiccest13 · January 19th, 2008

Quote:

Originally Posted by haddad287

Do you got BEV and DN channels with the 169 bin rajiv?

Yours dont work? my dn just stopped!