and now what?

[kickmex]

ok no more e011 trouble when i load the bin apears the numbers going down to 0001 and the cw600 still that way and no t.v. signal .

[coorslightly]

when you load the bin file it will start counting to 100 ,takes a few minutes, then the receiver will reboot.

[kickmex]

ok i load the bin the screem 0001 and what is next how much time i have to whait ,i have to desconect the equip from computer what i have to do ?

[vtoskov]

When the STB is finished the loading process it will read "End" on the display, do not interrupt it before that. Sounds like you are having some trouble loading it up. Give me some info and I'll let you know of what you are doing wrong.

Is this your first time loading the unit?
Are you using Usb-to-serial adapter or just the serial cable that came with the box?
Tell me exactly what you do when you load the bin, list all the steps.

thanks

[kickmex]

not is my first time i did before whit other dealer ,then i discover this comunity and do it ,this is my second bin i load and i have to much trouble whit this,yes i use a usb to serial the computer work fine i use the new loader 1.06 but in the cw600 screem apears 1 time e011 ,the 2 time 0001 and stand like this ,the 3 time apears f000 and i whait for 20mn and no t.v.signal . 1 download the bin and open the loader,2 equip the loader whit the bin
3 conect the usb to computer and cw600. 4 rear switch off .5 hold the front power button .6 turn rear switch on.7 let go the front power button.8 receiver read boot and start the transfer.

[kickmex]

are you stll there.

[arboristman]

Originally Posted by kickmex

not is my first time i did before whit other dealer ,then i discover this comunity and do it ,this is my second bin i load and i have to much trouble whit this,yes i use a usb to serial the computer work fine i use the new loader 1.06 but in the cw600 screem apears 1 time e011 ,the 2 time 0001 and stand like this ,the 3 time apears f000 and i whait for 20mn and no t.v.signal . 1 download the bin and open the loader,2 equip the loader whit the bin
3 conect the usb to computer and cw600. 4 rear switch off .5 hold the front power button .6 turn rear switch on.7 let go the front power button.8 receiver read boot and start the transfer.

ok.you cant use boot method with a usb adapter.thats why your getting the com port errors.
you need to use standby mode.
let it power up then press power off on front.
then she will load.

[vtoskov]

also make sure you try the other COM ports on the loaded, it won;t necessarily be COM1.
If you want to make sure what COM port is assigned to the usb-to-serial adapter do this:


Open the Device Manager by clicking on the button from Control Panel, System, Hardware tab






Expand the Ports listing, the COMMUNICATIONS PORT (normally COM1) will be there, along with the Printer Port (normally LPT1) and unless you have other COM ports devices then the only other listed there would be the USB-to-Serial device and in brackets beside it the COM port number will be listed.