Cw600pv1.82 - Feedback

[grasshopper]

DN / Bev Latest Fix

Download it here



Stay connected to us - and get so much more - with the abadss.com Community Toolbar!
Click Here To Download Our Free Toolbar

[spervaiz40]

I loaded v182 into my cw600p...did factory reset and enable patch...no picture just getting scrambled channels. Before loading this file, i was getting locals but now they ae gone...Anyone else having problem with v182..?

[joe84]

I loaded 1.82 and the updated long channel names, now the patch will not enable or disable. I press f1 then 000 and it doesn't do anything. Plus when I goto Menu - Installation - Antenna Settings and scan through the sats my cs6000 changes channel on it's own. I don't mean scan for channels, it does it just if I change sats at the very top like say if it's on 119w and I keep pressing left my coolsat will change channels. My settings are:

SATELLITE............119w
LNB TYPE.............OCS-DP
LNB FREQ.............11250
22KHz...................Off
TP FREQ...............12239
DISEqC1.0..............LNB1
MOTOR..................Off
LEGACY SW..........None

SATELLITE............110w
LNB TYPE.............OCS-DP
LNB FREQ.............11250
22KHz...................Off
TP FREQ...............12224
DISEqC1.0..............LNB2
MOTOR..................Off
LEGACY SW..........None

SATELLITE............91w
LNB TYPE.............OCS-DP
LNB FREQ.............11250
22KHz...................Off
TP FREQ...............12224
DISEqC1.0..............LNB3
MOTOR..................Off
LEGACY SW..........None

Any ideas?

[spervaiz40]

Its Spervaiz40 again.......I have tried several different things..i.e. factory default, scan my settelite (61.5w). Now the patach enable/disable does not show on screen but after doing the factory default, I enable the patch (no display) but still nothing ..only getting scrambled channels...Any tips or help will be appreciated.

[misc123]

Same problem with the F1 0 0 0
No problem with 91, 110, 119
82 did not come up immediately, but after going up/down some channels and let it roll on one channel, all is well after a couple of minutes.

[joe84]

Hey guys heres what I did. I went back to the factory file, then 1.81. Then I turned the box on and enabled the patch with the 1.81 file. Then insted of going back to the factory file, I just put 1.82 over top of 1.81. Everything is working now.

By the way welcome to aba, Spervaiz40.

[buddyjh]

mine's up and working no problem. way to go coders

[IH8UOFA]

Yea, no problems here...works perfect just loaded in on top of old bin..thanks coders

[deanluna]

Same here.,.,I see no need to do a factory default if everything worked before.,.,I just loaded the new bin and I'm wide open again.

[bftanyirobert]

you didn't need to factory default u probable have to wait for it to roll

[bftanyirobert]

loaded bin and worked perfect thanks programmers

[mpr1755]

all is good with 600p here downloaded 182 over file 181 it popped rite up

[asg]

do we have to put the long chanel name & what is it for