CW-600S Premium bin down?

[jaydawg]

Hey guys i have the CW-600S Premium
and i keed getting scrambled channel is the bin down or is there something wrong with the reciever? i have the
Cw600pv1.98 installed.Thanks in advance

[edwinsao]

you have to enable the key patch,just press F1 then you will see a H in your display,now press 000 and thats all

[cholito]

If you already did what edwin said, you need to leave it on one channel for a little while..sometimes close to ten minutes, most of the time less but the keys need to upgrade themselves and once they do.....enjoy.

[raihanc]

I am having the same issue, after loading Cw600pv1.98 it stopped to work. showing in B/W Scramble. Is something wrong with CW600S?

[jaycool]

Originally Posted by raihanc

I am having the same issue, after loading Cw600pv1.98 it stopped to work. showing in B/W Scramble. Is something wrong with CW600S?

You need to do a complete fctory default and download the factory file, than download the 1.98 again, reset ant settings and rescan. This is about the only way I know to get rid of the black and white thing.

[Gimpy13]

get rid of Black & White? you're on PAL instead of NTSC.....fix that setting in the menu, and you should be fine again with the colors. if you cant see the menu for whatever reason, then yes, do a factory default as this will reset your stb.

[cholito]

Originally Posted by raihanc

I am having the same issue, after loading Cw600pv1.98 it stopped to work. showing in B/W Scramble. Is something wrong with CW600S?

Again, if you did not mess with the settings and your box was working fine before you installed the new bin...all you need is patience and nothing more. Leave it on one channel for a little while and let the keys roll. Once they update, you will be back up again immediately after. I promise.

On my settings, I have it to where I get a popup whenever the new keys are rolling in so that way I know I'm only 2 seconds away from watching TV again.

[JG8507]

i have same problem but i do not have b/w i have try on n off from the back, i let for more than 10 min, F1 000, still scrambled channel, any idea? please help me and some signal is weak

[cholito]

Originally Posted by JG8507

i have same problem but i do not have b/w i have try on n off from the back, i let for more than 10 min, F1 000, still scrambled channel, any idea? please help me and some signal is weak

Are your settings all right?

119
tranponder 12239
LNB freq 11250
LNB type ocs-dp
22kzh off
Diseqc lnb1
legacy sw off
motor off

110
tranponder 12224
LNB freq 11250
LNB type ocs-dp
22kzh off
Diseqc lnb2
legacy sw off
motor off

Also, do you have auto roll on?

How's your signal and quality?

Please post all your settings from the antenna and the system settings.

When you do F1000, does it say Patch Enable?


Need more info guys....then helping you will be much easier.

[JG8507]

i adjust the settings like you said
yes it is roll on
no signal or quality
yes say enable
still weak signal

[cholito]

Originally Posted by JG8507

i adjust the settings like you said
yes it is roll on
no signal or quality
yes say enable
still weak signal

If you have no signal or quality....seems like your dish is pointing in the wrong direction or your cable might be defective.

[JG8507]

everything was working fine before, do you think that i need to check my dish anyway?

[JG8507]

is working now was a bad cable thanks to all great support.bye

[jaydawg]

I fixed mine today too,It was the dish Thanks Guys

[Bud_Alcor]

Originally Posted by jaydawg

I fixed mine today too,It was the dish Thanks Guys

glad tht you wrote bck...

[AFGOOIE]

just got home... What happened box not working