Howdy all! Ive just done a factory default& have a couple questins about settings&scan. Have 2LNB on one BEV oval dish. 91w/82w going thru a SW21 switch to a CW600s premium. On the antenna setting screen do I reset the transponder values?91 is @10964 & 82 is @ 12224. Ive read 91 is 12224 & 82is 12239. what do I set the diseqc & legacy switch to? Lastly what way is best to scan for optimum channels? could i go to Easy Tuning screen and set 2ports with nimiq1 &2 and close the other2ports?Any help would b awesome!
No need to worry about those trans settings unless your checking for signal strength. Scan each sat 1 at a time is best using the autoscan feature. Use the ports 1 and 2 what ever way you want ie 82 port 1 and 91 port 2. Unless you have a sat plugged into a port no need to close it, not sure how you would close it anyways.
Newbie help
Howdy all! Ive just done a factory default& have a couple questins about settings&scan. Have 2LNB on one BEV oval dish. 91w/82w going thru a SW21 switch to a CW600s premium. On the antenna setting screen do I reset the transponder values?91 is @10964 & 82 is @ 12224. Ive read 91 is 12224 & 82is 12239. what do I set the diseqc & legacy switch to? Lastly what way is best to scan for optimum channels? could i go to Easy Tuning screen and set 2ports with nimiq1 &2 and close the other2ports?Any help would b awesome!
Re: Newbie help
A large thanx to bigevil69 and boboisno1 for their time and useful help. Gonna go and git r dun!!
Linear Mode
