Signal is Weak

[lilcap]

I'll try your last post because she still singing off key with the sat 110 when she should be on 119.

Just reverified the other boxes all are on the correct sat, meaning 119 lines up with 119 & 110 lines up with 110.

[lilcap]

About to try the clone, should I be using "444"for the code or "333".

[arboristman]

444 is everything if i remember right.
where's that guide lol?
edit:
http://www.abadss.com/forum/133-cw60...s-premium.html

yeah its with that one.
yup id do 444.

[lilcap]

Cloning didn't work, still the same thing.....I use the "444" code for the clone.

[arboristman]

bummer.
how old is it?

(hey p.s.,your cowboys will be on free to air-open channels on 123w tomorrow:
http://www.abadss.com/forum/889-true...-9-7-08-a.html)

[lilcap]

close to a year

[lilcap]

I noticed that is also picks up sat 110 when goto sats 82, 118, & 148. This is really wierd because I would assume that it's my dish if any of the other boxes were having the same problems but they are not what's more the other boxes do good when I hook them to the same cable as well.

[arboristman]

yeah,for sure.had you not stated other stbs did fine on that dp twin,i would had guessed the lnb went bad.

[lilcap]

It gets even stranger....The problems seems to rest with this one box. I connected it to the other coaxial connections in the house where other stb's are located. The problems goes from 110 being found where it shouldn't be to 119 being found where it shouldn't be.

Just to be clear....connect this one stb up to my coaxial it show 110 being on 119. Connect the same stb to other conaxial in the house & it shows 119 being on 110.

But get this, connect any of the other stb's up to any coaxial in the house & they all show up correctly....110 on 110 & 119 on 119. Clearly it's the box I would think but not understanding why. I've factory default, I've reloaded the factory bin & started over from scratch, I've even cloned it.

[lilcap]

BTW - I'm using a dp500 quad lnb with 4 lines coming into the house via a coaxial pass-through type connector outside the house. not using any switches at all. 4 lines from the quad lnb to the straight through connector then 4 lines from the straight through connector to the house.

[BertoOn20zz]

Not to seem as though I am high jacking the thread but can we have to dif. sats coming to the box from 1 lnb?

[lilcap]

Not to seem as though I am high jacking the thread but can we have to dif. sats coming to the box from 1 lnb?

Yes you can depending on the kind of lnd you are using, this link should explain it all: http://www.abadss.com/forum/29-fta-a...itch-info.html